10 Jan
2013
10 Jan
'13
8:12 p.m.
Hi Klaus
Thanks for posting the working solution.
You are right that mhomed=1 won't help if the sockets both have same IP
address. Though I think if you used it with two different IPs and the
correct routing tables on the OS then it would work.
In any case your solution is a good one.
Richard
On 7 January 2013 15:45, Klaus Darilion <klaus.mailinglists(a)pernau.at>wrote;wrote:
Hi all!
On 04.01.2013 18:57, Ovidiu Sas wrote:
Hello Klauss,
I use record_route_preset for this kind of scenarios:
http://kamailio.org/docs/**modules/3.3.x/modules_k/rr.**html#id2550086<h…
That was the main reason that I enhanced record_route_preset with the
second parameter (see the Note on string2).
I haven't tried your idea with two sockets. Let us know if it's working.
If you need to use the same port on the internal and external
interface, you could add a new IP to the host and listen on two
sockets on the same port and force the socket when sending a request
out.
listen=udp:10.10.0.2
listen=udp:10.10.0.3 advertise pu.bl.ic.ip
I did some basic tests (incoming, outgoing, on/off-hold). The service
provider's SIP trunk was an Asterisk with NAT traversal disabled. Kamailio
was NATed 1:1 to the public IP address (exclusively, without port
translation). I tested Kamailio only doing near-end NAT-traversal (taking
care of its own NAT).
I used two IP addresses for the two sockets, but I must works also with a
single IP address and different ports.
Conclusion: works :-)
Following is the setup how I tested it (if you need to add far-end NAT
traversal (SIP clients behind another NAT) then it will more complex).
regards
Klaus
# Service Provider for SIP Trunk: 5.5.5.5
# public IP address of Kamailio/rtpproxy: 3.3.3.3
# rtpproxy binds to 10.10.0.3
listen=udp:10.10.0.2
listen=udp:10.10.0.3 advertise 3.3.3.3:5060
mhomed=0
route[RELAY] {
if (src_ip == 5.5.5.5) {
force_send_socket("10.10.0.2")**;
rtpproxy_manage("","10.10.0.3"**);
} else {
force_send_socket("10.10.0.3")**;
rtpproxy_manage("","3.3.3.3");
}
...
t_relay();
}
onreply_route {
if (src_ip == 5.5.5.5) {
force_send_socket("10.10.0.2")**;
rtpproxy_manage("","10.10.0.3"**);
} else {
force_send_socket("10.10.0.3")**;
rtpproxy_manage("","3.3.3.3");
}
}
______________________________**_________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/**cgi-bin/mailman/listinfo/sr-**users<http:/…