4 Aug
2006
4 Aug
'06
9:45 a.m.
Hi,
It doesn't work, with the 'c' flag all the c= tags remain unchanged.
-----Original Message-----
From: Ovidiu Sas [mailto:sip.nslu@gmail.com]
Sent: Thursday, August 03, 2006 5:00 PM
To: Pletli Antal
Cc: users(a)openser.org
Subject: Re: [Users] Two c= tag in sdp body
Check the new 'c' flag in 1.1 release:
http://www.openser.org/docs/modules/1.1.x/nathelper.html#AEN275
-ovi
On 8/3/06, Pletli Antal <a.pletli(a)euromacc.hu> wrote:
Hello,
I use OpenSer with Cisco AS5300/5350/5400 with IOS 12.3.
When Cisco sends an OK 200 SIP message to OpenSer, there are two "c=IN
IPV4"
tags in sdp body with the same IP address.
The nathelper module only replaces the last occurence of c= tag so
some SIP clients works wrong because those get the first IP from the
first
"c="
tag...
How can i replace the all occurences of "c=" tag in sdp body with the
help of nathelper?
Thx,
Antal
Content-Type: application/sdp.
Content-Length: 277.
.
v=0.
o=CiscoSystemsSIP-GW-UserAgent 7144 773 IN IP4 213.253.220.242.
s=SIP Call.
c=IN IP4 213.253.xxx.xxx. -> this is the original address of Cisco GW
t=0 0.
m=audio 35944 RTP/AVP 18.
c=IN IP4 213.253.xxx.yyy. -> this is the nated address replaced
by
nathelper
a=rtpmap:18 G729/8000.
a=fmtp:18 annexb=no.
m=video 35946 RTP/AVP.
c=IN IP4 213.253.220.253.
a=nortpproxy:yes.
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users