Hi Faisal,
You say you've seen packets on kamailio but kamailio isn't replying !!
1- Please verify that yuor kamailio is indeed started *[ps -ef | grep kamailio]* 2- Verify if kamailio is actuallay listening on the same port as you are sending pcakets to ! *[netstat -pln|grep kamailio]* 3- Verify if your kamailio is using the same protocol as of your client i.e TCP or UDP or TLS etc. 4- instead of viewing the file* /var/log/kamailio* see* /var/log/messages *because you haven't mentioned local7 as Log facility in your config. I don't see your syslog*.conf * file in this mail! check that file and follow the referenced linkhttp://www.kamailio.org/dokuwiki/doku.php/utils:basic-syslog-configuration completely.
Also see your configurations kamailio.cfg file and use define tags from second line from top onward i.e just after #!KAMAILIO. Try getting rid of the comment line "*####### Defined Values #########*" - in my experience such comment before define cause trouble with configurations.
See all these and then reply with updates.
Regards, Sammy G.
On Tue, May 29, 2012 at 2:18 PM, Daniel-Constantin Mierla <miconda@gmail.com
wrote:
Hello,
you can set debug=3 in kamailio config to see very verbose debug messages. If you don't get any, means the request does not reach the application layer, meaning you have a firewall in place that drops the packets from the network.
Cheers, Daniel
On 5/29/12 8:02 AM, Faisal Yousuf wrote:
Hi Experts, I am a newbee with SIP-Router/Kamailio - I installed Kamailio on a CentOS 5.5 VM - following the instructions from the following link
http://kb.asipto.com/kamailio:install:3.0.x-from-git-centos5x
Kamailio is installed & I can start kamailio deamon from service kamailio start
However I also created two subscribers - but when I try to register my SIP Phone (by setting Kamailio as the domain to register to) - I can see my sip-phone sending the Register request to Kamailio (I put a tcpdump on the kamailio machine to see sip-messages reaching the host) but I dont get any response from Kamailio - so my sip phone reaches the 408 Registeration Timeout state.
Now, I dont get any logs from Kamailio to know what is happening while my phone is sending the register request - I tried to configure logging following instructions from the following link
http://www.kamailio.org/dokuwiki/doku.php/utils:basic-syslog-configuration
But I dont get any logs in the /var/log/kamailio log file.
To assist in understanding the issue - I am attaching the syslog config , kamailio config file & the kamailio service script in the init.d folder.
My first objective will be to enable logging for kamailio & the next objective is to get the basic registration & routing between endpoints - my ultimate objective is to configure SER/Kamailio as a load-balancer for our B2BUA & Media Servers (I found the dispatcher module can help in accomplishing this) - Can anybody help me in identifying why I am not getting any logs ? I have already seen the wiki & have developed some understanding regarding how Kamailio is configured but am I seeking more information regarding the route language - (the state-model + reference of the functions that can be used in the route script etc.) - in this regards if I can get any documentation pointers from the user community that can help me gain a better understanding the use of Kamailio for above it will be great
Regards, Faisal
Regards, Faisal
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla - http://www.asipto.comhttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda Kamailio Advanced Training, Seattle, USA, Sep 23-26, 2012 - http://asipto.com/u/katu
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users