17 Jan
2004
17 Jan
'04
4:05 a.m.
Hi List,
I 'am facing a problem with ser/radius configuration which is working fine except for
the accounting part. In freeradius accounting details I see that both start and stop time
is same, can somebody help me on how to fix this.
here is my ser.cfg
#
# ----------- global configuration parameters ------------------------
debug=9 # debug level (cmd line: -dddddddddd)
fork=no
log_stderror=yes # (cmd line: -E)
listen=10.0.0.1
/* Uncomment these lines to enter debugging mode
debug=7
fork=no
log_stderror=yes
*/
check_via=no # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/ser_fifo"
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database
loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/uri.so"
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_db.so"
loadmodule "/usr/local/lib/ser/modules/acc.so"
loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
loadmodule "/usr/local/lib/ser/modules/group_radius.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
modparam("usrloc", "db_mode", 2)
modparam("auth_radius",
"radius_config","/usr/local/etc/radiusclient/radiusclient.conf")
#modparam("auth_radius", "service_type", 15)
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
modparam("acc", "log_level", 1)
modparam("acc", "radius_flag", 1)
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
break;
};
if (len_gt( max_len )) {
sl_send_reply("513", "Message too big");
break;
};
# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol
record_route();
# loose-route processing
# t_relay();
# break;
# };
if (loose_route()) {
if (method=="BYE" || method=="CANCEL") {
log (1, "BYE or CANCEL\n");
setflag(1);
};
t_relay();
break;
};
# if the request is for other domain use UsrLoc
# (in case, it does not work, use the following command
# with proper names and addresses in it)
if (method=="REGISTER") {
log(1, "REGISTER: Authenticating user\n");
if (!radius_www_authorize("")) {
log(1, "REGISTER: challenging user\n");
www_challenge("", "0");
break;
};
save("location");
break;
};
##########################################################################################################
if (uri=~"^sip:44[127][0-9]+@.*$")
{
if (rewritehostport("10.0.0.8:5060"))
{
if (!t_relay())
{
sl_reply_error();
};
}
else
{
sl_reply_error ();
};
break;
}
else if (method=="INVITE")
{
sl_send_reply("403", "Call cannot be served here");
};
# account completed transactions via syslog
setflag(1);
###############################################################################################################
if (method=="INVITE") {
log(1, "INVITE\n");
setflag(1); /* set for accounting (the same value as in
log_flag!) */
};
if (method=="MESSAGE") {
log(1, "MESSAGE\n");
setflag(1); /* set for accounting (the same value as in
log_flag!) */
};
if (method=="BYE" || method=="CANCEL") {
log (1, "BYE or CANCEL\n");
setflag(1);
};
# native SIP destinations are handled using our USRLOC DB
if (!lookup("location")) {
sl_send_reply("404", "Not Found");
break;
};
if (!t_relay()) {
sl_reply_error();
break;
};
}