Re: [SR-Users] Kamailio and MSILO with TLS AORs

Hello,

most likely the messages are looped back, be sure you allow requests from 'myself' without authentication.

You can watch loopback interface with ngrep to see if the messages are sent out.

Cheers, Daniel

On 16/04/14 18:46, Roberto Fichera wrote:

Hi All,

I've started to play with MSILO module on kamailio v4.1.2, but it seems that all the stored messages aren't delivered to the give user even if, looking at the debug log, the given messages are found and queued for shipping. Another info I can add is that all the users are connected in TLS. The relevant conf is below. Doe anyone can suggest a working setup for TLS users?

Thanks in advance, Roberto Fichera.

# ----- msilo params ----- modparam("msilo", "db_url", DBURL) modparam("msilo", "from_address", "sip:$rU@test.net") modparam("msilo", "contact_hdr", "Contact: msilo@test.net:5060;msilo=yes\r\n") modparam("msilo", "content_type_hdr", "Content-Type: text/plain\r\n")

# Handle SIP registrations route[REGISTRAR] { if (is_method("REGISTER")) { if(isflagset(FLT_NATS)) { setbflag(FLB_NATB); # uncomment next line to do SIP NAT pinging ## setbflag(FLB_NATSIPPING); }

       # MSILO - dumping user's offline messages
      if (m_dump())
      {
         xlog("MSILO: offline messages dumped - if they were for user $fu\n");
      }
      else
      {
        xlog("MSILO: no offline messages dumped\n");
      }

      exit;
 }

}

and in the route[LOCATION] I've this snippet

  xlog( "Checking the destination user $rU exists\n");
   if(avp_db_query("select username from subscriber where username='$rU'"))
   {
       xlog("MESSAGE received $ru -> storing using MSILO user=$rU\n");
       if(m_store("$ru"))
       {
          xlog("MSILO: offline message stored\n");
          if (!t_reply("202", "Accepted"))
          {
             sl_reply_error();
          }
       }
       else
       {
          xlog("MSILO: offline message NOT stored\n");
          if (!t_reply("503", "Service Unavailable"))
          {
             sl_reply_error();
          }
       }
       # if the downstream UA doesn't support MESSAGE requests
       # go to failure_route[1]
       t_on_failure("1");
       exit;
   }
   else
   {
       # The destination recipiend doen't exist
       xlog( "Unable to store message for $ru because the user doesn't exist" );
       if (!t_reply("404", "Not Found"))
       {
          sl_reply_error();
       }
       exit;
    }
 }

---

SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users