Hi,
Yes, i'm using ethereal that's why i'm sure that BYE is not reaching the SER and DeltaThree's servers.
Can the problem be that the SER is located behind NAT i don't have a option to try it on a public IP. X-Lite is registered as user@192.168.0.1 on SER but it's user@<public IP> on delta servers. At the moment i can't forward my public IP to accept SIP requests to 192.168.0.2 so in my X-Lite configuration i'm using 192.168.0.2 as sip proxy.
If you think that it could be a problem let me know so i can try to find out a way to start SER on a public IP.
Regards, Nikola
how do you know that there is no BYE? Do you capture the network traffic on the proxy and on the client side? Use ethereal to verify if there are differences to the BYE and CANCEL messages.
klaus
Nikola Stojanoski wrote:
HI Klaus,
i'm testing SER to redirect the calls started with 00 to natrelay.deltathree.com because my sip server is behind NAT, the scenario is like this:
X-Lite --> SER --> DeltaThree --> etc .... |_________| NAT
X-Lite has 192.168.0.1 SER 192.168.0.2
and as i've told you i can send a call CANCEL it but i can't send BYE to stop a call that is already in progress
Here is my config.
debug=1 # i had this at "3" initially" fork=yes log_stderror=no # (cmd line: -E)
/* Uncomment these lines to enter debugging mode fork=no log_stderror=yes */
check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo"
# # Listen # listen=192.168.0.2
# # Aliases # alias=igor.intranet.com.mk alias=192.168.0.2
# ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/textops.so"
# Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so"
# We want to earn money, therefore we need accounting loadmodule "/usr/local/lib/ser/modules/acc.so"
# !! Nathelper loadmodule "/usr/local/lib/ser/modules/nathelper.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params -- modparam("usrloc", "db_mode", 2) modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser")
# # Accounting Setup # #modparam("acc", "db_url", "sql://ser:heslo@localhost/ser") modparam("acc", "log_level", 1) modparam("acc", "log_flag", 1)
# Account failed transactions modparam("acc", "failed_transactions", 1)
# Which data should be accounted? # # c = Call-Id # d = To tag (Dst) # f = From # i = Inbound Request-URI # m = Method # o = Outbound Request-URI # r = fRom # s = Status # t = To # u = digest Username # p = username Part of inbound Request-URI # # default is "miocfs" # modparam("acc", "log_fmt", "miocfst")
# -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes)
# # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "db_url", "mysql://ser:heslo@localhost/ser") modparam("auth_db", "password_column", "password")
# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)
# !! Nathelper modparam("registrar", "nat_flag", 6) modparam("nathelper", "natping_interval", 30) # Ping interval 30 s modparam("nathelper", "ping_nated_only", 1) # Ping only clients behind NAT
# ------------------------- request routing logic -------------------
# main routing logic route{ # Accounting TEST # How does this work anyway? And why 1+2? setflag(1); setflag(2);
# initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len >= max_len ) { sl_send_reply("513", "Message too big"); break; }; # !! Nathelper # Special handling for NATed clients; first, NAT test is # executed: it looks for via!=received and RFC1918 addresses # in Contact (may fail if line-folding is used); also, # the received test should, if completed, should check all # vias for rpesence of received if (nat_uac_test("3")) { # Allow RR-ed requests, as these may indicate that # a NAT-enabled proxy takes care of it; unless it is # a REGISTER if (method == "REGISTER" || ! search("^Record-Route:")){ log("LOG: Someone trying to register from private IP, rewriting\n");
# This will work only for user agents that supportsymmetric # communication. We tested quite many of them and majority is # smart enough to be symmetric. In some phones it takes a configuration # option. With Cisco 7960, it is called NAT_Enable=Yes, with kphone it is # called "symmetric media" and "symmetric signalling". fix_nated_contact(); # Rewrite contact with source IP of signalling
if (method == "INVITE") { fix_nated_sdp("1"); # Add direction=active toSDP }; force_rport(); # Add rport parameter to topmost Via setflag(6); # Mark as NATed }; };
# we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") { record_route(); } # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); break; }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # SQL Digest Auth if (!www_authorize("", "subscriber")) { www_challenge("", "1"); break; }; save("location"); break; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); break; }; # Destination DeltaThree if( uri=~"^sip:00[0-9]*@.*") { route(1); break; }; # native SIP destinations are handled using our USRLOCDB if (!lookup("location") ) { sl_send_reply("404", "Not Found"); break; }; }; append_hf("P-hint: usrloc applied\r\n"); route(1); }
route[1] { # !! Nathelper if (uri=~"^sip:(.+@)?(192.168.|10.|172.(1[6-9]|2[0-9]|3[0-1]).)" && !search("^Route:")) { sl_send_reply("479", "We don't forward to private IP addresses"); break; };
# if client or server know to be behind a NAT, enable relay if (isflagset(6)) { force_rtp_proxy(); }; # NAT processing of replies; apply to all transactions (forexample, # re-INVITEs from public to private UA are hard to identify as # NATed at the moment of request processing); look at replies t_on_reply("1");
# Route to PSTN Gateways(s) if (uri=~"^sip:00[0-9]*@.*") { ## This assumes that thecaller is log("Forwarding to DeltaThree\n"); strip(2); rewritehostport("natrelay.deltathree.com:5060"); t_relay(); break; };
# Local Domain User # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); };}
# !! Nathelper onreply_route[1] {
# NATed transaction ? if (isflagset(6) && status =~ "(183)|2[0-9][0-9]") { fix_nated_contact(); force_rtp_proxy(); # otherwise, is it a transaction behind a NAT and we did not # know at time of request processing ? (RFC1918 contacts) } else if (nat_uac_test("1")) { fix_nated_contact(); };}
Regards, Nikola
Hi Nikola!
Without message dumps its impossible for us to solve your problems!
regards, Klaus
Nikola Stojanoski wrote:
I'm trying to setup SER to route my outgoing calls to DeltaThree's servers. So far i'v managed to forward the calls but my problem is that if a call starts somehow i can't record route the call and my UA is not sending BYE to the servers, so i'm getting billed more than i talk. For call duration of 0:10 i can see 1:45 on deltathree servers.
If you manage to work something out let me know.