Sorry for the misspell. I did have "^SIP:" in there. I tried forward(),
t_relay_to_udp() , t_relay_to(). None of them work. I also used ngrep to
display the sip messages. it seems the message never get forward to PSTN
gateway. Although I can directly connect to PSTN gateway with my sip phone
and make phone call. How can I debug this thing?
gary
----- Original Message -----
From: "Jan Janak" <jan(a)iptel.org>
To: "gc" <garych(a)unidial.com>
Cc: <serusers(a)lists.iptel.org>
Sent: Tuesday, June 08, 2004 5:42 AM
Subject: Re: [Serusers] Problem using PSTN.
The reqular expression is not correct, it should be
something like this:
if (uri =~ "^sip:1.*")
Jan.
On 07-06 09:15, gc wrote:
> I am having problem using PSTN(AS5300). I have a VOCAL setup on the same
machine and PSTN works fine with VOCAL. Now I want to test SER on the same
machine. I shut down VOCAL and start SER. I can make SIP to SIP calls but
can not make SIP to PSTN call. In my ser.cfg, I redirect all the calls
starting with 1 to the PSTN like this:
if
(uri=~"^1.*"){
log(1,"Forwarding to PSTN\n");
record_reoute();
rewritehostport("PSTN IP:PORT");
};
Do I need any specific module for PSTN to work? How can I debug this?
Gary
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers