I do not have the possibility to use Patton 4960 with 1xPRI. I wished an alternative method for Patton1 + patton2 + patton3: 8+8+8=32. thanks
This is the code for 2 Patton
Hi!
On the pattons you can created Error Messages when not circuit channel is available And on Ser you have to register to Failure Route to the route of the first patton and the failure route point to the second Patton.
PATTON1:
profile sip default map causes to-sip no-circuit-channel-available to 486 map causes to-sip resources-unavailable to 486
service hunt-group HUNT-BRI cyclic timeout 1 drop-causes normal-unspecified drop-causes no-circuit-channel-available drop-causes network-out-of-order drop-causes temporary-failure drop-causes switching-equipment-congestion drop-causes access-info-discarded drop-causes circuit-channel-not-available drop-causes resources-unavailable route call 1 dest-interface ISDN_01 route call 2 dest-interface ISDN_02 route call 3 dest-interface ISDN_03
SER:
Ser.cfg:
if (uri=~ ". *sip: 012345 ") # Patton 1 {t_on_failure (1); t_relay_to_udp (11.11.11.10, 5060); break; }
failure_route [1] { if (method== " INVITE ") { if (t_check_status (600|486)) #### ErrorCode from Patton 1 { #####call from Patton 1 -- 486 (Busy) ret -- call switch to Patton 2 ###### if (uri=~ ". *sip: 012345 ") # Costumer xy { append_branch (); t_relay_to_udp (11.11.11.11, 5060); ##Unterroute ist hier nicht notwendig, break; ##da sich die Verrechnung hier nicht aendert } } }
Which code to use for 3 patton?
------------------------------------------------------ Leggi GRATIS le tue mail con il telefonino i-mode di Wind http://i-mode.wind.it/