Re: [SR-Users] Placing ds_select_dst in kamailio.cfg, where?

Hello,

please keep the mainling list cc-ed.

Calling ds_select_dst() first in the main route block is not really a good place. First you have to handle sanity checks, within dialog requests a.s.o. Of course it is a matter of your purpose, but as general hint, selecting the destination should be done just (or as close as possible) before relaying.

If you take default config and you have only load balancing, then you can replace location lookup part with load balancing. Other parts may be stripped as well, just giving some direction here.

Cheers, Daniel

On 9/28/11 11:11 PM, Henrik Aagaard Sørensen wrote:

That did the job.

I just placed the ds_select_dst-code at the very first thing after route{

Thank you for your help!

2011/9/28 Daniel-Constantin Mierla <miconda@gmail.com mailto:miconda@gmail.com>

Hello,

the devel version of dispatcher module README has a different
config example, maybe it helps you more:

http://kamailio.org/docs/modules/devel/modules_k/dispatcher.html#id2522847

I am considering to update it again soon to be a bit more complete
and follow the structure of the default config file shipped with
kamailio.

Cheers,
Daniel


On 9/28/11 6:30 PM, Henrik Aagaard Sørensen wrote:

...

Hi Carsten.

The configuration works. It's actually where (which line) in the
configuration I should put:
ds_select_dst("1", "0");

:) I'm not strong in Kamailio and just want it to load balance
between Freswitch servers. So I have a basic installation of
Kamailio, without MySQL, NAT, Auth etc.

On Wed, Sep 28, 2011 at 5:09 PM, Carsten Bock
<carsten@ng-voice.com <mailto:carsten@ng-voice.com>> wrote:

    Hi,

    When you've got problems with placing "ds_select_dst()" in your
    config, you should do the following:
    - Open an Editor of your choice
    - go to the line, where you want to place it
    - type: ds_select_dst("1", "0");
    - save & exit

    Just kidding! You should do the following with your config:
    kamailio -f <path-to-your-config> -c

    What error is displayed? If none, then check your syslog for
    errors.
    Could you post your config? It is better to put a full path
    in the
    config to the dispatcher-file... otherwise it might be
    dependent of,
    where you are running the init.d-skript/kamailio....

    I am using dispatcher in Kamailio 1.5, 3.1 and 3.2,
    everythings works
    fine with me.

    Kind regards,
    Carsten

    2011/9/28 Henrik Aagaard Sørensen
    <henrikaagaardsorensen@gmail.com
    <mailto:henrikaagaardsorensen@gmail.com>>:
    > I've installed 2 Freeswitch on different servers and would
    like to have
    > Kamailio load balance between them.
    >
    > I've installed Kamailio following:
    >
    http://www.kamailio.org/dokuwiki/doku.php/install:kamailio-3.1.x-from-git
    >
    > I've created dispatcher.list and added:
    >
    > loadmodule "dispatcher.so"
    >
    > modparam("dispatcher", "list_file", "../etc/dispatcher.list")
    >
    > in the kamailio.cfg.
    >
    > But looking at:
    >
    http://kamailio.org/docs/modules/3.1.x/modules_k/dispatcher.html
    > I'm having difficulties to placing:
    >
    > ds_select_dst("1", "0");
    >
    > in the kamailio.cfg that was created originally.
    >
    > Can anyone help me?
    >
    > _______________________________________________
    > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users
    mailing list
    > sr-users@lists.sip-router.org
    <mailto:sr-users@lists.sip-router.org>
    > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
    >
    >



    --
    Carsten Bock
    CEO (Geschäftsführer)

    ng-voice GmbH i. Gr.
    Schomburgstr. 80
    D-22767 Hamburg / Germany

    http://www.ng-voice.com
    mailto:carsten@ng-voice.com <mailto:carsten@ng-voice.com>

    Mobile +49 179 2021244 <tel:%2B49%20179%202021244>
    Office +49 40 34927219 <tel:%2B49%2040%2034927219>
    Fax +49 40 34927220 <tel:%2B49%2040%2034927220>

    _______________________________________________
    SIP Express Router (SER) and Kamailio (OpenSER) - sr-users
    mailing list
    sr-users@lists.sip-router.org
    <mailto:sr-users@lists.sip-router.org>
    http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org  <mailto:sr-users@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

-- 
Daniel-Constantin Mierla --http://www.asipto.com
Kamailio Advanced Training, Oct 10-13, Berlin:http://asipto.com/u/kat
http://linkedin.com/in/miconda  -- http://twitter.com/miconda