look at rtpp_defines.h re-compile rtpproxy. put a rtpproxy script in /etc/rc.d/init.d redhat you must add option in this script if ser run on the same box. So look at your ser.cfg script if you want call others domains or your own domain
Harry
--- Freeman hykh080@yahoo.com.hk a écrit :
How can i get more information about config port range of rtpproxy, because not found in onsip.org !
Tks a Lot ! Freeman
harry gaillac gaillacharry@yahoo.fr »¡¡GHello,
If ser and rtpproxy run on the same box your ser.cfg is wrong.
you need to define rtp range ports when you compile rtpproxy according to the rules of you fiwerall
Look at onsip.org for help !
Harry --- Freeman a écrit :
Hi,
I installed "Ser-0.8.14" + "nathelper" + "rtpproxy" in RedHat 9.0, and add "./rtpproxy" in startup script, when i tried both sipsoftphone in the internet behind NAT that can connect but "no voice" and auto hang-up, but when both
sipsoftphone
in local network that no problem !
Which port range i need release for rtpproxy in
the
firewall ?
my ser.cfg config as below :
# ----------- global configuration parameters
#debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode fork=no */ #log_stderror=yes #debug=4 check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo"
# ------------------ module loading
loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule
"/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/textops.so" loadmodule
"/usr/local/lib/ser/modules/nathelper.so"
# Uncomment this if you want digest authentication # mysql.so must be loaded ! #loadmodule "/usr/local/lib/ser/modules/dbtext.so" #loadmodule "/usr/local/lib/ser/modules/auth.so" #loadmodule
"/usr/local/lib/ser/modules/auth_db.so"
#loadmodule "/usr/local/lib/ser/modules/mysql.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 0) #modparam("auth_db", "db_url", "db:/var/dbtext") #modparam("auth_db", "user_column", "user") #modparam("auth_db", "domain_column", "domain") #modparam("auth_db", "password_column",
"password")
#modparam("auth_db", "calculate_ha1", 1) #modparam("auth_db", "password_column_2", "ha1_2") modparam("registrar", "nat_flag", 6) modparam("nathelper", "natping_interval", 30) #
Ping
interval 30 s modparam("nathelper", "ping_nated_only", 1) # Ping only clients behind NAT modparam("nathelper", "rtpproxy_sock","/var/run/rtpproxy.sock") # -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes
(which
true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column",
"password")
# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)
# ------------------------- request routing logic
# main routing logic #define NAT_UAC_TEST_C_1918 0x01 /*
- test for occurences of RFC1918 addresses in
Contact
- header field
*/ #define NAT_UAC_TEST_RCVD 0x02 /*
- test if source address of signaling is different
from
- address advertised in Via
*/ #define NAT_UAC_TEST_V_1918 0x04 /*
- test for occurences of RFC1918 addresses in SDP
body */ #define NAT_UAC_TEST_S_1918 0x08 /*
- test for occurences of RFC1918 addresses top Via
*/ route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len >= max_len ) { sl_send_reply("513", "Message too big"); break; }; if (nat_uac_test("3")) { append_hf("Alex-hint: NAThelper\r\n"); fix_nated_contact(); # Rewrite contact with source IP of signalling if (method == "REGISTER" || ! search("^Record-Route:")) { #if (www_authorize("iptel.org", "subscriber")) { # www_challenge("iptel.org", "1"); # }; if (method == "INVITE") { append_hf("Alex-hint: SDP rewritten\r\n"); fix_nated_sdp("3"); # Add direction=active to SDP }; log("LOG: Someone trying to register from private IP, rewriting\n"); force_rport(); # Add rport parameter to topmost Via setflag(6); # Mark as NATed }; };
if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); break; }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { save("location"); break; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break;
=== message truncated ===> _______________________________________________
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
___________________________________________________________________________ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger Téléchargez cette version sur http://fr.messenger.yahoo.com