I will send instructions for the first port and you will be able to do the same for the other ports.
In the provisioning MIB, find the key: sipMib -> sipUAGroup Start by configuring the SER address: sipMib -> sipUAGroup -> sipUAServerGroup -> sipUAServerStaticGroup and configure the parameters therein. Such as Registrar Host, Port ...
Second, configure the port 1 as follows: sipMib -> sipUAGroup -> sipUA1Group configure the main alias entry which should be the account created on the SER server for that port you may even configure other things if needed such as other aliases, .... For other ports, just replace # in sipUA#Group by the correct port number (2, 3 or 4)
Also, you may need to enable some options in the provisioningMib key.
Thanks Emery ----- Original Message ----- From: "Director General: NEFACOMP" dg@nefacomp.net To: sesha@iic.com; serusers@lists.iptel.org Sent: Wednesday, October 22, 2003 15:53 Subject: Re: [Serusers]SIP Gateway
I was asking the firmware version (the software installed on the 1204).
Not
the Unit Manager.
I am going to send you instructions on how to set up accounts in the unit. These are accounts the unit uses in registering with the SER server. Note that you will need to configure the same accounts within SER.
Thanks Emery ----- Original Message ----- From: "Sesha B" sesha@iic.com To: "Director General: NEFACOMP" dg@nefacomp.net; serusers@lists.iptel.org Sent: Wednesday, October 22, 2003 14:55 Subject: RE: [Serusers]SIP Gateway
Hi, I'm using Unit Manager Express version 1.1.1.5 to configure Mediatrix
I have configured it to use SIP. I am confused about setting up accounts
on
Mediatrix. Is there a way to set up accounts on mediatrix? I'm testing
it
with one SIP phone.
-----Original Message----- From: Director General: NEFACOMP [mailto:dg@nefacomp.net] Sent: Wednesday, October 22, 2003 4:55 AM To: sesha@iic.com; serusers@lists.iptel.org Subject: Re: [Serusers]SIP Gateway
I used Mediatrix 1204. Have set up all the accounts that Mediatrix should use in registering to SER? What software version are your Mediatrix using? You sometimes need to upgrade your firmaware. Also, the same Mediatrix can be H.323 or SIP. Are you sure that yours is using SIP?
Thanks Emery ----- Original Message ----- From: "Sesha B" sesha@iic.com To: serusers@lists.iptel.org Sent: Monday, October 20, 2003 23:02 Subject: RE: [Serusers]SIP Gateway
Hi,
I'm using a SIP gateway (Mediatrix 1204) on 4 ports on PBX. I am not
able
to
register the gateway on the SIP server. Is there a way I check the
logs
on
the SER to see if it is really registering or not? And can someone
please
suggest why is the SIP Gateway not registering with the SER? Thank you
very
much.
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers