Hello, Thanks for a quick reply.
No, outbound module is not loaded. As I understood from RR docs double_rr won't work if outbound module is present. I've added mhomed=1 to my config, but record_route() still inserts only one rr with transport=ws.
Are you using outbound? If you are I suggest trying git master rather than the 4.0 branch.
Regards,
Peter
On 31 July 2013 10:53, Vitaliy Aleksandrov <vitalik.voip@gmail.com mailto:vitalik.voip@gmail.com> wrote:
Hello. I'm trying to configure kamailio as a gateway between Websocket and TCP/TLS transports. When I call record_route() for an initial INVITE that comes via WS and will be forwarded via TCP to a registered UA kamailio inserts only a one record-route header with its IP and transport=ws instead of two record-route headers with both incoming/outgoing transports. This behaviour breaks in-dialog requests routing. rr module parameters are: modparam("rr", "enable_full_lr", 1) modparam("rr", "append_fromtag", 0) modparam("rr", "enable_double_rr", 1) I use: - kamailio-4.0.2 - sipml5 as sip client Can anybody point me in the right direction to understand why it happens ? _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Peter Dunkley Technical Director Crocodile RCS Ltd
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users