21 Jan
2014
21 Jan
'14
11:08 a.m.
Hello,
if you do:
kamctl mi get_statistics all
do you see an increase of active transactions counter?
Would be possible for you to compile with MEMDBG=1 and then get the
memory logs?
make MEMDBG=1 cfg
Then add your extra modules in include_modules variable inside modules.lst
Afterwards:
make install
Edit kamailio.cfg and set memlog global parameter to a lower value than
debug global parameter.
Run kamailio for a while with the new config, when you see the shared
memory keeps increasing, stop kamailio. Send the log messages from
syslog to mailing list or made them available for download somewhere.
Cheers,
Daniel
On 21/01/14 09:54, Shankar wrote:
Hi,
Anyone who had used t_suspend() and t_continue() can share the
performance details?
I tried async module with one sec sleep time. I tried only 5 calls per
second but still it was not successful. After sometime I see below logs,
Jan 21 13:51:55 PLT-RA-RD-W167A PCscf[16520]: ERROR: tm
[t_suspend.c:128]: t_continue(): ERROR: t_continue: transaction not found
Jan 21 13:52:49 PLT-RA-RD-W167A last message repeated 15 times
Jan 21 13:59:38 PLT-RA-RD-W167A last message repeated 12 times
Jan 21 14:13:03 PLT-RA-RD-W167A last message repeated 5 times
Any configuration changes can help here?
Regards,
Shankar
*From:*Shankar [mailto:shankar.rk@plintron.com]
*Sent:* Wednesday, January 15, 2014 1:26 PM
*To:* 'Jason Penton'
*Cc:* 'SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) -
Users Mailing List'
*Subject:* RE: [SR-Users] FW: Regd. t_suspend() and t_continue()
Hi Jason,
I am using 4.0.2
Regards,
Shankar
*From:*Jason Penton [mailto:jason.penton@smilecoms.com]
*Sent:* Wednesday, January 15, 2014 1:21 PM
*To:* Shankar
*Cc:* SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) -
Users Mailing List
*Subject:* Re: [SR-Users] FW: Regd. t_suspend() and t_continue()
Hi Shankar,
What version of Kamailio are you running? Kamailio -V
Cheers
Jason
On Wed, Jan 15, 2014 at 6:58 AM, Shankar <shankar.rk(a)plintron.com
<mailto:shankar.rk@plintron.com>> wrote:
Hi Jason,
Please find below my response inline,
I have some questions for you as we have used suspend/continue quite a
lot in the IMS code and don't have any leaks.
Firstly, why are you using pkg_mem for your hash_id and label?
Remember that you will be in 2 different processes in the suspend and
continue portions of the code... so pkg_mem will not work - you should
use shm_mem instead.
[Shankar] We use pkg_mem because we are invoking t_continue from the
same process ( using thread ).
Secondly, how are you using top to tell that you have a leak?
Kamailio's memory is internally managed.
[Shankar] After running for say 20minutes, we get out of shared memory
error. Also in top output we observed incremental increase in the
shared usage of shared memory for the process.
Cheers
Jason
On Mon, Jan 13, 2014 at 1:29 PM, Shankar <shankar.rk(a)plintron.com
<mailto:shankar.rk@plintron.com>> wrote:
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Re-sending without the attachment.
*From:* Shankar [mailto:shankar.rk@plintron.com]
*Sent:* Monday, January 13, 2014 4:57 PM
*To:* 'sr-users(a)lists.sip-router.org
<mailto:sr-users@lists.sip-router.org>'
*Subject:* Regd. t_suspend() and t_continue()
Hi,
We are trying out the t_suspend() and
t_continue() in our test setup.
We are facing memory leak ( both shm and pkg as
per top command
results).
Please find below the scenario,
1) Do a t_newtran()
2) Allocate pkg memory for hashid and label.
3) Call t_suspend()
4) Do t_continue() when async result is
available
5) De-allocate pkg memory reserved for
hashid and label
6) Do a t_relay() which forwards the sip
message to another sip
node.
In the step (6) above, we see t_newtran()
allocates one more time
shared memory for the same transaction.
We tried t_release() after step (4) to release
the transaction as
t_relay() anyways allocates new shared memory.
Nothing helped.
Please let me know what are the logs you would
require to debug the
same.
I am attaching syslog for this run.
Regards,
Shankar
--
*Jason Penton*
*Senior Manager: Applications and Services*
*Smile Communications Pty (Ltd)*
*Mobile:*
+27 (0) 83 283 7000
*Skype:*
jason.barry.penton
jason.penton(a)smilecoms.com <mailto:name.surname@smilecoms.com>
www.smilecoms.com <http://www.smilecoms.com/>
This email is subject to the disclaimer of Smile Communications
athttp://www.smilecoms.com/disclaimer
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users