13 Dec
2007
13 Dec
'07
11:07 p.m.
Hi All ,
I am trying to do parallel forking from SER.But when I call then one user
gets 2 calls and rest of the users get one call .
Please any one explain why it is happening.
Here I attach my openser.cfg file...
# main routing logic
route{
# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
exit;
};
if (msg:len >= 2048 ) {
sl_send_reply("513", "Message too big");
exit;
};
# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol
if (!method=="REGISTER")
record_route();
# subsequent messages withing a dialog should take the
# path determined by record-routing
if (loose_route()) {
# mark routing logic in request
append_hf("P-hint: rr-enforced\r\n");
route(1);
};
if (!uri==myself) {
# mark routing logic in request
append_hf("P-hint: outbound\r\n");
# if you have some interdomain connections via TLS
#if(uri=~"(a)tls_domain1.net") {
# t_relay("tls:domain1.net");
# exit;
#} else if(uri=~"(a)tls_domain2.net") {
# t_relay("tls:domain2.net");
# exit;
#}
route(1);
};
# if the request is for other domain use UsrLoc
# (in case, it does not work, use the following command
# with proper names and addresses in it)
if (uri==myself) {
if (method=="REGISTER") {
# Uncomment this if you want to use digest
authentication
#if (!www_authorize("192.168.3.15",
"subscriber")) {
# www_challenge("192.168.3.15", "0");
# exit;
#};
save("location");
exit;
};
lookup("aliases");
log("I M IN lookup");
if (!uri==myself) {
append_hf("P-hint: outbound alias\r\n");
route(1);
};
# native SIP destinations are handled using our USRLOC DB
if (!lookup("location")) {
sl_send_reply("404", "Not Found");
exit;
}
else {
append_branch();
append_hf("P-hint: usrloc applied\r\n");
t_relay();
}
};
route(1);
}
route[1] {
# send it out now; use stateful forwarding as it works reliably
# even for UDP2TCP
#if (!t_relay()) {
if (!forward()) {
sl_reply_error();
};
exit;
}
Gomtesh