[SR-Users] HTTP Client configuration path

Hi all! I am using HTTP_CLIENT module, and have created a http configuration file. The module's config_file parameter is set as: modparam("http_client", "config_file", "/etc/kamailio/http_client.cfg") and it works OK on my DEV environment, because there is a symlink /etc/kamailio pointing to physical folder /usr/local/etc/kamailio/ (using Kamailio 5.7.4) However in our integration environment (also using Kamailio 5.7.4), which is identical to production, and due to limitations on access rights, we cannot create a symlink /etc/kamailio pointing /usr/local/etc/kamailio/, so all cfg files are in the installation folder. So I thought that the config_file parameter should be a relative path, starting with " ./ " or by just setting the config file name, without path (as per documentation at http_client (kamailio.org) <https://kamailio.org/docs/modules/5.1.x/modules/http_client.html#idp38265140> . The issue is that even though the file http_client.cfg is present in /usr/local/etc/kamailio/, as well as other cfg files, the cfg_parser fails to load it: Jul 11 09:32:09 lab-kamailio kamailio[44114]: ERROR: <core> I have set the parameter to and also to but it only works if I add it as : or by adding in the main cfg script, which was my final solution. Also checked for permissions, and all is fine. Note that this only seems to happen with http_client config_file parameter. I have other include commands in the main cfg file with relative paths and all works fine. I have also analysed the cfg_parser.so file, which loads the configuration file for http_client module, but could not find anything wrong with it (at 1st glance....) What am I doing wrong? Any clue? Atenciosamente / Kind Regards / Atentamente / Cordialement, *Sérgio *