11 Mar
2011
11 Mar
'11
5:52 p.m.
Hi, All
Thanks for all your reply. I use Kamailio 3.0.2. Now I know contact header is: $ct
I have some problem when I want to modify the header.
Eg.
Register: UA---->OpenSer----->SIP proxy
Contact in Register request is:
----------------------------------------------
REGISTER SIP:10.30.105.30:5060 SIP/2.0
Contact: "M1080"
<sip:1080@10.30.102.127:5060>;+sip.instance="<urn:uuid:00000000-0000-1----8000-00085D215A5A>";expires=1800;reg-id=0
-----------------------------------------------
However, when SIPproxy reply the 200 OK, contact changed because it doesn't support
sip.instance and reg-id:
-----------------------------------------------
SIP/2.0 200 OK
Contact: <sip:1080@10.30.102.127:5060>;expires=1800;
-----------------------------------------------
My question is when forward 200 OK to UA, how the OpenSer use the original contact to
replace the contact in the 200 OK from Sip Proxy.
I read textops, but I still don't have an idea for this issue.
Your reply is appreciated!
Derrick
-----Original Message-----
From: Carsten Bock [mailto:carsten@ng-voice.com]
Sent: Friday, March 11, 2011 9:22 AM
To: Derrick Ding
Cc: Asgaroth; Alex Balashov; sr-users(a)lists.sip-router.org
Subject: Re: [SR-Users] pseudo variables available in on_reply route(where can I find all
variables stand for)
Hi,
see:
http://www.kamailio.org/dokuwiki/doku.php
-> Pseudovariables
Carsten
2011/3/11 Derrick Ding <dding(a)aastra.com>om>:
Hi, All
I started using Kamailio this week.
Could any one tell me where I can find all variables(eg, $ru, $du, $rd,
$rp, etc) stand for.
Thanks a lot!
Derrick
-----Original Message-----
From: sr-users-bounces(a)lists.sip-router.org
[mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of Asgaroth
Sent: Thursday, March 10, 2011 10:04 PM
To: Alex Balashov
Cc: sr-users(a)lists.sip-router.org
Subject: Re: [SR-Users] pseudo variables available in on_reply route
Hi Alex,
On 11/03/2011 02:37, Alex Balashov wrote:
--
Carsten Bock
http://www.ng-voice.com
mailto:carsten@ng-voice.com
Schomburgstr. 80
22767 Hamburg
Germany
Mobile +49 179 2021244
Office +49 40 34927219
Fax +49 40 34927220
Are you actually talking about the destination
set, or the domain part
of the request uri? If the latter, check out $rd and $rp.
I'm looking for the domain part of the destination uri. I have the
following reply route defined:
onreply_route[REPLY_ONE] {
xlog("REPLY_ONE : $rm : R-URI=$ru\n");
xlog("REPLY_ONE : $rm : D-URI=$du\n");
xlog("REPLY_ONE : $rm : Request Domain=$rd\n");
xlog("REPLY_ONE : $rm : Request Port=$rp\n");
xlog("REPLY_ONE : $rm : Destination Domain=$dd\n");
}
The output I get from the above is as follows:
[17344]: ERROR: <script>: REPLY_ONE : INVITE : R-URI=<null>
[17344]: ERROR: <script>: REPLY_ONE : INVITE : D-URI=<null>
[17344]: ERROR: <script>: REPLY_ONE : INVITE : Request Domain=<null>
[17344]: ERROR: <script>: REPLY_ONE : INVITE : Request Port=<null>
[17344]: ERROR: <script>: REPLY_ONE : INVITE : Destination Domain=<null>
Do I need to enable an option somewhere to be able to access these
variables in onreply route?
Thanks
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users