13 Oct
2008
13 Oct
'08
9:54 a.m.
Hi Klaus,
Klaus Darilion wrote:
Not sure what you mean:
For detection if the gateway responds at all use fr_timer. I set it to 2
seconds. If there is no reply from the gateway within 2 seconds, the
failure route will be executed. If there is a reply (e.g. 100), then tm
module changes to fr_inv_timer which I have set to 120 seconds.
I must have misunderstood the module documentation, then. The
documentation for the fr_timer section specifically says:
"Timer which hits if no final reply for a request or ACK for a
negative INVITE reply arrives (in seconds)."
I understood this literally; it applies to *final* responses, not
provisional ones.
But after reading your reply I looked at the "timer-based failover"
section above it and it says:
"fr_timer - this timer is used when no response was received yet. If
there is no response after fr_timer seconds the timer triggers (and
failure route will be executed if t_on_failure() was called). If a
provisional response was received, the timer is set to fr_inv_timer
for INVITE transactions, and RT_T2 for all other transactions. If a
final reponse is received, the transaction has finished. "
So which one is it? Do provisional responses affect fr_timer expiration
or not?
--
Alex Balashov
Evariste Systems
Web : http://www.evaristesys.com/
Tel : (+1) (678) 954-0670
Direct : (+1) (678) 954-0671
Mobile : (+1) (706) 338-8599