24 Dec
2009
24 Dec
'09
3:42 p.m.
hi,
is a blade hp server which is works with external disk(they are connected
with optical line.) BUT because for the blade I'm working in there is no
space in that disk so I'm working in local disk which is pata technology!!!
very old and slow IO.
Does anyone knows hot to define a htable in kamailio.cfg. I included details
in my previous email
Thanks
Alex
On Thu, Dec 24, 2009 at 2:02 PM, Alex Balashov <abalashov(a)evaristesys.com>wrote;wrote:
On 12/24/2009 06:59 AM, Henning Westerholt wrote:
On Wed, December 23, 2009 9:52 am, alex pappas wrote:
Oh, so that's what the '-' does. Thanks Henning, one learns something new
every day from you. :-)
Alex - this server is not a Dell Poweredge 2850/2950 with a PERC 5i, is it?
I have run into a bug on a few of these where I/O causes enormous
blocking/waiting, and discovered it by turning off syslogging and watching
the 'waiting' portion of the load to go down. It was necessary to replace
the defective PERC to fix the problem.
--
Alex Balashov - Principal
Evariste Systems
Web : http://www.evaristesys.com/
Tel : (+1) (678) 954-0670
Direct : (+1) (678) 954-0671
_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users(a)lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
In the server I'm running Kamailio I have a
good CPU(4 cores) and 2G
memory but for reading or writing to the disk i have a big problem.Is a
blade server with very bad disk which they do also software raid 1. Even
if I try to write in the log file of kamailio I get such a high load
that I cannot pass the 10 CPS.
Hey Alex,
ok, this is indeed a really bad disk. :) Regarding the slow logging, you
could check the syslog configuration if its configured to write
asynchronously (there should be a "-" in front of the log statement in
syslog.conf). And also check if you perhaps not use a to high log level in
the kamailio cfg.