26 Mar
2008
26 Mar
'08
8:31 a.m.
I am using this module in production with more then
400k routes loaded
for 8 different providers and it is working like a charm.
As Henning mentioned, the interface is a little bit cumbersome but usable.
You can put all the carriers under the same table and prioritize the
gateway based on domains. Like tis you don't need to hardcode
anything in the config file.
Carrierroute was designed to deal with a big amount of routing rules
and it is doing an amazing job.
LCR was designed to deal with a limited number of routes/gateways but
it has a different level of flexibility and a more mature interface.
Carrierroute is a brand new module and for sure it will improve in
flexibility as times go by (just like the lcr did along releases).
Ovidiu (or anyone else....)
I think I may almost have it..... If I treat all routes as being in the same carrier, I
can just use cr_rewrite_uri("1","call_id"), and then
cr_rewrite_uri("2","call_id") in failure_route[1] and
cr_rewrite_uri("2","call_id") in failure_route[2], correct? I tested
this and it seems to work. I guess it's up to me then to populate the rewrite_host
column with a gateway belonging to the cheapest carrier for domain 1, the a gateway from
the next cheapest carrier for domain 2 and so on. Still sound right?
Here's where it gets a bit tricky. We have OpenSER running in 6 different locations.
The gateways we use will differ for each location (we always want to use the closest
gateway belonging to a carrier). So, I figured I could use the 'user'
functionality in carrierroute to do this. I could simply put the domain (IP address) in
the domain column, leave the user blank (we don't have users... calls are forwarded
from asterisk), and then associate a carrier in the cr_preferred_carrier column. You can
see all that in my subscriber table below.
Doesn't seem to work though. When routing a call, OpenSER complains that it can't
find a default carrier, and then because it seems not to match the incoming call against
an entry in the subscriber table, it can't find a carrier to use, and fails the call.
So... how would I be able to use the source IP address of the asterisk box that sends the
calls to OpenSER in the subscriber table so that I could have different routing entries
for each OpenSER system???
Here's my db tables...
mysql> select * from route_tree;
+----+-----------+
| id | carrier |
+----+-----------+
| 1 | Hong Kong |
| 0 | San Jose |
+----+-----------+
mysql> select * from carrierroute order by carrier, scan_prefix, domain;
+----+---------+-------------+--------+------+-------+--------------+----------------+----------------+---------+
| id | carrier | scan_prefix | domain | prob | strip | rewrite_host | rewrite_prefix |
rewrite_suffix | comment |
+----+---------+-------------+--------+------+-------+--------------+----------------+----------------+---------+
| 1 | 0 | | 1 | 1 | 0 | 200.1.1.1 | |
| NULL |
| 4 | 0 | | 2 | 1 | 0 | 200.1.1.2 | |
| NULL |
| 5 | 0 | | 3 | 1 | 0 | 200.1.1.3 | |
| NULL |
| 9 | 1 | | 1 | 1 | 0 | 100.1.1.1 | |
| NULL |
| 10 | 1 | | 2 | 1 | 0 | 100.1.1.2 | |
| NULL |
| 11 | 1 | | 3 | 1 | 0 | 100.1.1.3 | |
| NULL |
+----+---------+-------------+--------+------+-------+--------------+----------------+----------------+---------+
mysql> select id, username, domain, cr_preferred_carrier from subscriber;
+----+----------+----------------+----------------------+
| id | username | domain | cr_preferred_carrier |
+----+----------+----------------+----------------------+
| 1 | | 192.168.255.53 | 0 |
| 2 | | 192.168.255.54 | 1 |
+----+----------+----------------+----------------------+
____________________________________________________________________________________
Never miss a thing. Make Yahoo your home page.
http://www.yahoo.com/r/hs