Re: [OpenSER-Users] newbie help - handeling 302s and 404s

Hi Lazer,

i need a simple config that achieves the following (w/ out a db)

if a user is not registered then all calls should go to a default gw 192.168.10.1

the default gw will only respond w/ a 302 or a 404

if a 302 is received then openser should forward the call on to the new gw listed in the reply

if a 404 is received the call should be forwarded to a different gw

172.16.20.1

if the send gw is done then the call should die.

Try with somehting like this (not tested):

if (!lookup("location")) { route(5); exit; }

route[5] { rewritehostport("192.168.10.1:5060"); t_on_failure("1"); route(1); exit; }

route[1] { if (!t_relay()) { sl_reply_error(); }; exit; }

failure_route[1] { if (t_check_status("404")) { rewritehostport("172.16.20.1:5060"); append_branch(); t_relay(); } else { get_redirects("*"); t_relay(); } }

Saludos JesusR.

here is what i was thinking of but as a newbie i may be off my rocker i seem to get an error

ERROR: t_check_status: cannot check status for a reply which has no T-state established

but again my whole approach may be wrong.

           if (!lookup("location")) {

rewritehostport ("192.168.10.1:5060"); if (t_check_status("(404)|(480)")) { log("404 or 480 negative reply\n"); rewritehostport ("172.16.20.1:5060"); } else{ t_on_failure("1"); t_relay(); }

           failure_route[1] {

                   get_redirects("*");
                  t_relay();

} }

Saludos JesusR.

------------------------------------ Jesus Rodriguez VozTelecom Sistemas, S.L. jesusr@voztele.com http://www.voztele.com Tel. 902360305 -------------------------------------