Re: [SR-Users] drouting & rd

Hello I have setup 2 gateways in my dr_rules: 5,6 - so the 2nd one is tried if the first fails. The second one requires credentials. When the first one fails: I execute the following code: failure_route[ROUTEFAIL] {         if ( t_check_status("[345][0-9][0-9]") or (t_branch_timeout() and !t_branch_replied() )) {                 t_on_failure("ROUTEFAIL");                 if (use_next_gw()) {                         xlog("L_INFO","failure_route(ROUTEFAIL) @@ routing to: rd: $rd, ru:$ru, t_relay");                         t_relay();                         exit;                 } then in the same ROUTEFAIL (before this code), I have if (t_check_status("401|407")) { xlog("L_INFO","failure_route(ROUTEFAIL) @@ call to uac_auth(),   $si rd: $rd\n"); ..... So, when the first gateway replies with a 404, it executes correctly the first block, finds the second gw and I see in the log that rd is set to its address.  Yet, when the 2nd gw replies with 401, rd is set to the very first gw. However, the pcap traces confirm it is indeed the second that replies this. If this behaviour is correct, I cant seem to find the source IP of the gateway that replied to me, to retrieve credentials from the db. version: kamailio 5.0.5 / 5.0.6 (tested on both) Thank you for your help J _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users