21 Jun
2007
21 Jun
'07
2:10 p.m.
Hi Kumar,
I recommend you the Eyebeam.
Maybe you don't have the softphone well configured for presence,
On the Presence Tab you have to choose "Presence Agent" for "Mode".
On the Storage Tab you have to choose "XCAP" for "Storage Method" and
enter your xcap server (e.g. http://<ip-address>:8080/xcap-root/) for
"Root URL"
Regards,
Toni
-----Original Message-----
From: users-bounces(a)openser.org [mailto:users-bounces@openser.org] On
Behalf Of KUMAR
Sent: quinta-feira, 21 de Junho de 2007 10:04
To: Dave Waiting
Cc: users(a)openser.org
Subject: [OpenSER-Users] Re: [Users] presence
Can anyone recommend any good softphone for windows with which i can
test presence.
kumar
On 6/21/07, KUMAR <kumar.kisalaya(a)gmail.com> wrote:
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
Thank you Dave,
That cleared a lot of things.
kumar
On 6/21/07, Dave Waiting <david(a)crg.ee.uct.ac.za> wrote:
> Hi Kumar
>
> Unfortunately I don't have Eyebeam, so I'm not sure if it even
supports
> XCAP, although from what I've heard it does.
Maybe someone else can
give
> you some guidance as to what settings need to be
changed.
>
> I think there is some confusion as to how XCAP works.
>
> XCAP uses HTTP to retrieve and send documents to an XCAP server.
This
> may or may not be located on the same machine as
your SIP Presence
> server. As far as I know OpenSER only deals with SIP messages and
> therefore does not support the XCAP protocol. That's why you need
XCAP-lite.
>
> The confusing part is that the OpenSER presence module can look at
XML
> pres-rules documents that were obtained by the
XCAP server and make
> presence decisions based on these documents. But OpenSER does not
deal
> with the XCAP protocol itself, only the resulting
XML documents.
>
> XCAP-lite uses Apache to listen for incoming HTTP GET and PUT
requests.
> Your client (eyebeam) must send the XML
pres-rules documents using
HTTP
> to the XCAP server (probably listening on port
80) and not to the
SIP
> presence server (probably listening on port
5060).
>
> So the openser.cfg file should not be consulted for XCAP requests,
only
> for SIP PUBLISH and SUBSCRIBE presence requests.
It looks to me like
> eyebeam is trying to set the pres-rules using SIP not XCAP and that
is
> why it's not recognizing the event type.
(Your openser.cfg file
looks
> fine by the way.)
>
> Regards
>
> Dave
>
>
>
> KUMAR wrote:
> > Hi Dave,
> > Where do I need to change the settings, in Eyebeam or in
Openser.cfg.
> > I couldnt find any setting in the Eyebeam to
make such change. As
for
> > my configuration file, i am attaching it
alongwith.
> > Thank you
> > kumar
> >
> > On 6/21/07, Dave Waiting <david(a)crg.ee.uct.ac.za> wrote:
> >>
> >> Now that I look a little closer it seems that Eyebeam is trying
to
> >> either get or set your pres-rules using
a SIP SUBSCRIBE.
> >>
> >> The XCAP protocol (and the XCAP-lite server) uses HTTP GET and
PUT
> >> methods to set and retrieve the
pres-rules documents. Try change
your
> >> settings to use XCAP rather than SIP to
change your pres-rules.
> >>
> >> Hope this helps.
> >>
> >>
> >> Dave Waiting wrote:
> >> > Hi Kumar
> >> >
> >> > As far as I am aware the presence module adheres to RFC3856 and
> >> > RFC3857. Therefore the only valid event types would be:
> >> >
> >> > Event: presence
> >> >
> >> > and
> >> >
> >> > Event: presence.winfo
> >> >
> >> > It seems strange that Eyebeam does not follow this syntax.
Perhaps
> >> > there is a setting you can change.
> >> >
> >> > Regards
> >> >
> >> > Dave
> >> >
> >> >
> >> >
> >> > KUMAR wrote:
> >> >> Hi all,
> >> >> I am using openser 1.2.1-notls (i386/linux), with eyebeam
configured
> >> >> to use XCAP, and i sitll get
the same error
> >> >>
> >> >> PRESENCE: handle_subscribe:Missing or unsupported event header
field
> >> >> value
> >> >> 2(12452) PRESENCE:handle_subscribe: ERROR occured
> >> >> 2(12452) WARNING: script writer didn't release transaction
> >> >>
> >> >> The packet capture shows that the Events field in the
SUBSCRIBE have
> >> >> Event:
ua-profile;profile-type=application;auid="pres-rules"
> >> >>
> >> >> Anyone please help me out. I really need to get this working.
> >> >> regards
> >> >> kumar
> >> >>
> >> >>
> >> >> On 6/20/07, Klaus Darilion <klaus.mailinglists(a)pernau.at>
wrote:
> >> >>>
> >> >>>
> >> >>> KUMAR wrote:
> >> >>> > About XCAP server, I am using XCAP simulator from
> >> >>> > (http://download.dns-hosting.info/XCAP/). What i want to
know is,
> >>> do i
> >>> > need to give the address of XCAP server in the openser.cfg,
> >>>
> >>> no
> >>>
> >>> > or is it
> >>> > automatically used by the presence module.
> >>>
> >>> no
> >>>
> >>> The XCAP server is only used by the client - e.g. eyebeam.
> >>>
> >>> regards
> >>> klaus
> >>>
> >>
> >> _______________________________________________
> >> Users mailing list
> >> Users(a)openser.org
> >> http://openser.org/cgi-bin/mailman/listinfo/users
> >>
> >
> >
>
>