Re: [Serusers] RE: One Way audio cut through problem

I am running a version of SER compiled from ser-0.8.12_src. I tried to load ser-0.8.14 but I could not get it to recognize the RTP proxy. Here is a copy of my ser.cfg. Any help would be greatly appreciated: # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) listen=64.77.16.75 listen=127.0.0.1 port=5060 children=16 check_via=yes # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) fifo="/tmp/ser_fifo" # syn_branch - Shall the server use stateful synonym branches? It is # faster but not reboot-safe. Default is yes. syn_branch=yes memlog=3 # hostname matching an alias will satisfy the condition uri==myself". alias=ari.com alias=64.77.16.75 # sip_warning - Should replies include extensive warnings? By default # yes, it is good for trouble-shooting. sip_warning=yes # server_signature - Should locally-generated messages include server's # signature? By default yes, it is good for trouble-shooting. server_signature=yes # reply_to_via - A hint to reply modules whether they should send reply # to IP advertised in Via. Turned off by default, which means that # replies are sent to IP address from which requests came. reply_to_via=no # mhomed -- enable calculation of outbound interface; useful on # multihomed servers. mhomed=0 # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/acc.so" loadmodule "/usr/local/lib/ser/modules/textops.so" loadmodule "/usr/local/lib/ser/modules/uri.so" loadmodule "/usr/local/lib/ser/modules/group.so" loadmodule "/usr/local/lib/ser/modules/msilo.so" loadmodule "/usr/local/lib/ser/modules/enum.so" loadmodule "/usr/local/lib/ser/modules/nathelper.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- modparam("usrloc|group|msilo|uri", "db_url","mysql://ser:heslo@localhost/ser") # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # -- tm params -- modparam("tm", "fr_timer", 20 ) modparam("tm", "fr_inv_timer", 90 ) modparam("tm", "wt_timer", 20 ) # -- msilo params modparam("msilo", "registrar", "sip:registrar@ari.com") # -- enum params -- # modparam("enum", "domain_suffix", "e164.arpa.") # -- nathelper params -- # modparam("registrar", "nat_flag", 1) modparam("nathelper", "natping_interval", 30) # Ping interval 30 s #modparam("nathelper", "ping_nated_only", 1) # Ping only clients behind NAT # -- acc params -- # that is the flag for which we will account -- don't forget to #modparam("acc", "db_flag", 1 ) #modparam("acc", "db_missed_flag", 3 ) # ------------------------- request routing logic ------------------- # main routing logic route { /* ********* ROUTINE CHECKS ********************************** */ # filter too old messages if (!mf_process_maxfwd_header("10")) { log(1, "LOG: Too many hops\n"); sl_send_reply("483","Alas Too Many Hops"); break; }; if ( msg:len >= max_len ) { sl_send_reply("513", "Wow -- Message too large"); break; }; if (search("^(Contact|m): .*(a)(192\.168\.|10\.|172\.16)")) { log(1, "src address different than via header->NAT detected\n"); log(1, "force_rport and fix_nated_contact and setflag(5)\n"); #try NAT traversal, works only if the client is symmetrical force_rport(); fix_nated_contact(); append_hf("P-hint: fixed NAT contact for request\r\n"); # flag 5 indicates that incoming request is from NATed client setflag(5); }; /* ********* RR ********************************** */ # to be safe, record route everything; UAs may use different # transport protocols and need to have SER in path record_route(); setflag(1); # if route forces us to forward to some explicit destination, # do so; check however first that a cheater didn't preload # a gateway destination to bypass PSTN ACLs if (loose_route()) { log(1, "Loose Route\n"); if ((uri=~"sip:[+0-9]+@64\.77\.16\.126")) { # it is gateway -- proceed to ACLs route(3); break; }; # route HF determined next hop; forward there append_hf("P-hint: rr-enforced\r\n"); t_relay(); break; }; /* ********* check for requests targeted out of our domain... ******* */ # sign of our domain: there is '@' (username) or : (nothing) in # front of our domain name ; ('.' is not there -- we handle all # xxx.iptel.org as outbound hosts);if none of these cases matches, # proceed with processing of outbound requests in route[2] if (!(uri==myself)) { log(1, "Not myself\n"); route(2); break; }; /* ************ requests for our domain ********** */ /* now, the request is for sure for our domain */ # registers always MUST be authenticated to # avoid stealing incoming calls if (method=="REGISTER") { # Make sure that user's dont register infinite loops if (search("^(Contact|m): .*(a)(ari\.com|64\.77\.16\.75)")) { log(1, "LOG: alert: someone trying to set aor==contact\n"); sl_send_reply("476", "No Server Address in Contacts Allowed" ); break; }; if (search("^(Contact|m): .*64\.77\.16\.126")) { log(1, "LOG: alert: protected contacts\n"); sl_send_reply("476", "No Server Address in Contacts Allowed" ); break; }; if (!www_authorize("ari.com" /* realm */,"subscriber" /* table name */ )) { # challenge if none or invalid credentials www_challenge( "ari.com" /* realm */,"0" /* no qop -- some phones can't deal with it */); break; }; # prohibit attempts to grab someone else's To address # using valid credentials; if (!check_to()) { log(1, "LOG: To Cheating attempt\n"); sl_send_reply("403", "That is ugly -- use To=id in REGISTERs"); break; }; if (isflagset(5)) { #register from nated client, save nat_flag=6 #in location table setflag(6); }; # it is an authenticated request, update Contact database now if (!(save("location"))) { sl_reply_error(); }; m_dump(); break; }; # NAT Traversal Code if ((isflagset(5)) || (isflagset(6))) { log(1, "at least one of the participants is NATed->record_route\n"); record_route(); log(1, " -->setting up reply processing ->onreply_route[1]"); t_on_reply("1"); if (method=="INVITE") { log(1, " INVITE request-->force_rtp_proxy, set NATED-INVITE flag(7)"); force_rtp_proxy(); append_hf("P-hint: request forced to rtp proxy\r\n"); setflag(7); }; }; # native SIP destinations are handled using our USRLOC DB if (lookup("location")) { log(1, "Native SIP destination detected\n"); append_hf("P-hint: USRLOC\r\n"); if (!t_relay()) { sl_reply_error(); break; }; }; # now check if it's about PSTN destinations through our gateway; if (uri=~"sip:\+?[0-9][0-9]*@.*") { log(1, "PSTN destination to be used\n"); route(3); break; }; } # route #----------------- PSTN ---------------------------------------------- # logic for calls to the PSTN route[3] { # turn accounting on setflag(1); /* require all who call PSTN to be members of the "int" group; apply ACLs only to INVITEs -- we don't need to protect other requests, as they don't imply charges; also it could cause troubles when a call comes in via PSTN and goes to a party that can't authenticate (voicemail, other domain) -- BYEs would fail then; exempt Cisco gateway from authentication by IP address --it does not support digest */ if (src_ip==64.77.16.126) { log(1, "From ARI Gateway"); } else { if ((method=="INVITE") && (!(src_ip==64.77.16.126))) { log(1, "LOG: need to auth PSTN invite"); if (!proxy_authorize( "ari.com" /* realm */,"subscriber" /* table name */)) { proxy_challenge( "ari.com" /* realm */, "0" /* no qop */ ); break; }; # let's check from=id ... avoids accounting confusion if (method=="INVITE" & !check_from()) { log(1, "LOG: From Cheating attempt\n"); sl_send_reply("403", "That is ugly -- use From=id next time (gw)"); break; }; if(!is_user_in("credentials", "int")) { sl_send_reply("403", "NO PSTN Privileges..."); break; }; consume_credentials(); }; # INVITE to authorized PSTN } # if you have passed through all the checks, let your call go to GW! log(1, "Rewriting Host and port"); rewritehostport("64.77.16.126:5060"); # snom conditioner if (method=="INVITE" && search("User-Agent: snom")) { replace("100rel, ", ""); }; t_relay_to_udp ("64.77.16.126","5060"); t_relay_to_tcp ("64.77.16.126","5060"); break; } # all incoming replies for t_onrepli-ed transactions enter here onreply_route[1] { log(1, "-------------------------------------------\n"); log(1, "onreply_route[1] entered\n"); if (isflagset(6)) { log(1, "transaction was sent to a NATED client -> fix nated contact\n"); fix_nated_contact(); append_hf("P-hint: fixed NAT contact for response\r\n"); } if ( (status=~"100") ) { log(1, "status 100 received\n"); }; if ( (status=~"180") ) { log(1, "status 180 received\n"); }; if ( (status=~"202") ) { log(1, "status 202 received\n"); }; if ( (status=~"200" || status=~"183") ) { log(1, "status 2xx or 183"); if ( isflagset(7) ) { log(1, "marked(7) as NATED-INVITE -> force_rtp_proxy \n"); force_rtp_proxy(); append_hf("P-hint: response forced to rtp proxy\r\n"); }; }; } #------------------- OUTBOUND ---------------------------------------- # routing logic for outbound requests targeted out of our domain # (keep in mind messages to our users can end up here too: for example, # an INVITE may be UsrLoc-ed, then the other party uses outbound # proxy with r-uri=the usr_loced addredd (typically IP)) route[2] { append_hf("P-hint: OUTBOUND\r\n"); t_relay(); } #------- ALIASED OUTBOUND -------------------------------------------- # routing logic for inbound requests aliased outbound; unlike # with real outbound requests we do not force authentication # as these calls are server by our server and we do not want # to disqualify unathenticated request originatiors from other # domains route[5] { append_hf("P-hint: ALIASED-OUTBOUND\r\n"); t_relay(); } _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers