11 Feb
2010
11 Feb
'10
4:28 a.m.
On 2/11/10 9:34 AM, Chandrakant Solanki wrote:
On Thu, Feb 11, 2010 at 10:26 AM, Chandrakant Solanki
<solanki.chandrakant(a)gmail.com <mailto:solanki.chandrakant@gmail.com>>
wrote:
On Wed, Feb 10, 2010 at 11:07 PM, Daniel-Constantin Mierla
<miconda(a)gmail.com <mailto:miconda@gmail.com>> wrote:
Hello,
check your config whether you send a reply and do xlog("Method
not supported...") before getting to your condition.
Cheers,
Daniel
On 2/10/10 10:46 AM, Chandrakant Solanki wrote:
what asterisk version are you using? Latest asterisks have support for
MWI, you just need to send SUBSCRIBE to it and asterisk will send NOTIFY
back, no need for sipsak workaround.
If you can send the config, some of us can spot if that is generated by
kamailio. As said in a previous email, kamailio basically does not care
about sip message methods, it can support anything, it is a matter of
what routing logic you put in config.
Cheers,
Daniel
Hi
below line is in my configuration...
loadmodule "pua.so"
modparam("pua", "db_url",
"mysql://kamailio:kamailio@172.16.0.10:3306/kamailio
<http://kamailio:kamailio@172.16.0.10:3306/kamailio>")
modparam("pua", "db_table", "pua")
----
----
if(is_method("NOTIFY") && src_ip==172.16.0.15) {
xlog("L_INFO", "NOTIFY Method found\n");
if(!t_relay()){
sl_reply_error();
}
}
----
----
I found following error in log...
Feb 10 15:14:40 kamailio_1 /sbin/kamailio[5597]: Method not
supported - M=NOTIFY RURI=sip:172.16.0.15
F=sip:2222222@pbxusers.net
<mailto:sip%3A2222222@pbxusers.net> T=sip:172.16.0.15
IP=172.18.100.89 ID=17dd4bb9-81d132a0(a)172.18.100.89
<mailto:17dd4bb9-81d132a0@172.18.100.89>
--
Regards,
Chandrakant Solanki
_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users(a)lists.kamailio.org <mailto:Users@lists.kamailio.org>
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
--
Daniel-Constantin Mierla
eLearning class for Kamailio 3.0.0
*http://www.asipto.com/
Hi
Thanks for quick reply,
I didn't specify xlog("Method not supported...") any where...
which module is require to work with NOTIFY method...
--
Regards,
Chandrakant Solanki
Hi
I am implementing MWI and for that i am using
http://lists.iptel.org/pipermail/serusers/2004-September/011552.html
when I executed sipsak, gives error on kamailio NOTIFY method not
supported....
NOTIFY sip:1111111@test.com <mailto:sip%3A1111111@test.com> SIP/2.0
From: 2222222 <sip:2222222@test.com <mailto:sip%3A2222222@test.com>>
To: <sip:1111111@test.com <mailto:sip%3A1111111@test.com>>
Contact: <sip:2222222@test.com <mailto:sip%3A2222222@test.com>>
Call-ID: 022270(a)172.18.100.73 <mailto:022270@172.18.100.73>
CSeq: 022270 NOTIFY
Event: message-summary
Content-Type: application/simple-message-summary
Accept: application/simple-message-summary
Content-Length: 38
Messages-Waiting: Yes
Message-Account: sip:1111111@test.com <mailto:sip%3A1111111@test.com>
Voicemail: 4/0
--
Regards,
Chandrakant Solanki
_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users(a)lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
--
Daniel-Constantin Mierla
eLearning class for Kamailio 3.0.0
* http://www.asipto.com/