RE: [Serusers] LCR failure syntax

Ok, I've checked over my config and am going bananas. I cannot get a "failover" scenario working. The first LCR load_gw is fine however whenever a call fails (in this instance I am generating a 404) it never sees the second priority. Thoughts? I Dial 636561XXXX I checked my logs, everything goes through just fine, get the 404 (per failover test), it gets caught by the failure if statement and spits out no more gateways.. lcr table (accounting for e164 and non) +------------+----------+--------+----------+ | prefix | from_uri | grp_id | priority | +------------+----------+--------+----------+ | +1636 | % | 2 | 1 | | +1636 | % | 1 | 2 | | 636 | % | 2 | 1 | | 636 | % | 1 | 2 | +------------+----------+--------+----------+ route[99] { t_on_failure("2"); if(!load_gws()) { sl_send_reply("500", "Internal server error, unable to load gateways"); break; } log (1, "Running next_gw\n"); if(!next_gw()) { sl_send_reply("503", "Service not available, no gateways found"); xlog("L_INFO", "<%ru> <%br>\n"); break; } xlog("L_INFO", "Time %Tf RURI <%ru> \n"); t_relay(); break; } failure_route[2] { log(1, "Hit failure route 2\n"); if(method == "INVITE" && t_check_status("408|500|503|480|400|404")) { xlog("L_INFO", "NOTICE: Hit failure 2 and error status code\n"); if (!next_gw()) { xlog("L_INFO", "ERROR: No more gateways for LCR failover dropping call\n"); t_reply("503", "Service not available, no more gateways"); break; } t_on_failure("2"); # ... t_relay(); } } -----Original Message----- From: Andres [mailto:andres@telesip.net] Sent: Thursday, April 07, 2005 5:11 PM To: Matt Schulte Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] LCR failure syntax Matt Schulte wrote: something like this.... route[8] { if (!load_gws()) { sl_send_reply("500", "Server Internal Error - Cannot load gateways"); break; }; if (!next_gw()) { sl_send_reply("503", "Service not available - No more gateways"); break; }; t_on_failure("4"); if (!t_relay()) { sl_reply_error(); }; } failure_route[4] { if (!next_gw()) { t_reply("503", "Service not available - No more gateways"); break; }; t_relay(); break; } -- Andres Network Admin http://www.telesip.net