29 Jan
2011
29 Jan
'11
7:01 p.m.
Stagg,
While the Ips are the same, the suggestion to use “rd” along with an entry
in the “hostname” column appears to be what I want.
I assigned in my DNS some testing hostnames to the single IP in question.
When debugging, I see that rd contains the hostname, not the IP. I believe
with that, I can differentiate between the two... And when I see hostname of
blah.blah.tld, then go ahead and do the force_send_socket.
This definitely solves the issue for the time being. However, I am wondering
if/when call volume increases if the call-setup time be delayed because of
these look ups. Everything that I have read so far is that the gw_name is
just information, the module doesn’t actually have access to it. Boo.
-graham
On 1/29/11 8:36 AM, "GP Wooden" <graham(a)g-rock.net> wrote:
Same destination IP for both rate decks, so I need to
go by something else,
like the gw_name.
----- Reply message -----
From: "Stagg Shelton" <stagg(a)vocalcloud.com>
Date: Sat, Jan 29, 2011 8:27 am
Subject: [SR-Users] LCR next_gw() - certain GW, source from other IP address
To: <sr-users(a)lists.sip-router.org>
Do the provider gateways have the same IP address for the different rate
plans? If the gateways are different then the following may be relevant.
if (next_gw()) {
# prepare for lcr failover
t_on_failure("2");
if($rd=="aaa.aaa.aaa.aaa")
{
xlog ("L_INFO", "This is a request for Some Rate
Plan");
force_send_socket(udp:xxx.xxx.xxx.xxx:5060);
}
else
{
xlog ("L_INFO", "This is a request for another rate
plan");
force_send_socket(udp:yyy.yyy.yyy.yyy:5060);
};
route(2);
} else {
xlog("No gateways found!");
Stagg
On 1/29/11 9:10 AM, Graham Wooden wrote:
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Hi
there,
I have a requirement now that for one of my GW¹s in my LCR, needs to be
sourced from another IP address (two different rate-decks with the
carrier).
> This ratedeck will always be at least 2nd inline ...
>
> I was thinking something along the sorts ... Some pseudo code:
>
> failure_route [2] {
> .
> .
> if (next_gw()) {
> if ( name = 'gw_name') {
> force_send_socket(udp:ip.address.of.certain.ip:5060);
> } else {
> # just dummy, as we will send out our default IP for everyone
> else.
> }
> t_on_failure("2");
> route(19);
> }
> .
> .
> .
> }
>
> What variable will have the value that's in the gw_name column? I can't go
> by the IP address in $ru because the destination IP is the same between the
> two ratedecks.
>
> Overall, Is that the best way to handle this requirement?
>
> Thanks all,
>
> -graham
>
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users(a)lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users