1 Apr
2019
1 Apr
'19
3:32 p.m.
The way I've always done this for things like AWS or natted is to use
one ip/port and advertise the external address and then if I have
another ip use that for internal... if I only have one IP, use a
different port.
Example 1:
listen=udp:192.168.25.31:5060 advertise 1.2.3.4:5060 #-- Public Socket
listen=udp:192.168.25.33:5060 #-- Private Socket
Example 2:
listen=udp:192.168.25.31:5060 advertise 1.2.3.4:5060 #-- Public Socket
listen=udp:192.168.25.31:5080 #-- Private Socket
Fred Posner
fred(a)qxork.com
https://qxork.com
Direct/SMS: +1 (224) 334-3733
Direct/SMS: +1 (336) 439-3733
Need Fred? Call Fred. 336-HEY-FRED
Matrix: @fred:matrix.lod.com
On 4/1/19 3:26 PM, Antony Stone wrote:
On Monday 01 April 2019 at 21:19:13, David Villasmil
wrote:
point taken.
But if i do have two separate interfaces, i would still have the same
issue, wouldn't i?
No, because (unless AWS works in some totally strange way that I can't imagine
being the case) the two interfaces would have different IPs and different
routes, and only one would be your default route to the Internet (ie: public
IP addresses).
Then your "internal" machines would connect to the IP on an interface which
only routes back to them and can't see the Internet, and public connections
would come in to a different IP on another interface which can route back to
them.
Someone with personal familiarity with AWS systems may be able to inject a
more definite answer here.
Antony.
On Mon, Apr 1, 2019 at 8:17 PM Antony Stone
wrote:
>
> Do you prefer to ask "how can I make this strange networking setup
> operate?"
> or "how can I arrange my networking so that this service works?"