Hello,
if you see 401 being returned by Kamailio, then the config file execution ends in calling auth_challenge() or a similar *_challenge() function from auth* modules. That means you do not match the traffic to use dispatcher for routing. You can set debug=3 to view more debug messages printed by kamaialio or use debugger module with cfgtrace enabled in order to see what configuration file actions are executed and see if you can identify why execution is not going where you expect to go.
Cheers, Daniel
On 20.02.22 06:28, warawich wrote:
Hello,
I would like to do a load balance between Asterisk SIP trunks. You can see a diagram from this link: https://drive.google.com/file/d/1Qy66L5rQCfxysYQpSd2-ek_8-by0T8PR/view?usp=s...
SIP Packets capture log: https://drive.google.com/file/d/1CHGUOwoRDAC93MMBtyfa8gBISKIVC-ng/view?usp=s...
Details
- Asterisk1 makes SIP trunk connection with Kamailio.
- Kamailio makes SIP trunk connection with Asterisk2 and Asterisk3
- Caller register SIP phone with Asterisk1
Caller extension = 8002 4. Asterisk2 makes a blind transfer to Kamailio. (Call to 8009 then transfer to ARI APP) exten = 8009,1,Transfer(SIP/3802@<kamailio public IP>) 5. ARI app extension is 3802
My problem is that Kamailio LB only works when I try to connect with Asterisk1 and Asterisk2 or Asterisk1 and Asterisk3. If I have two Asterisks in dispatcher.list, it doesn't work and it appears *SIP/2.0 401 Unauthorized* in sip packets capture log.
Kamailio version: 5.5.2 Kamailio.cfg
modparam("dispatcher", "list_file", "/etc/kamailio/dispatcher.list") modparam("dispatcher", "flags", 3) modparam("dispatcher", "xavp_dst", "_dsdst_") modparam("dispatcher", "xavp_ctx", "_dsctx_")
# Dispatch requests route[DISPATCH] { # round robin dispatching on gateways group '1' if(!ds_select_dst("1", "4")) { send_reply("404", "No destination"); exit; } xdbg("--- SCRIPT: going to <$ru> via <$du> (attrs: $xavp(_dsdst_=>attrs))\n"); t_on_failure("RTF_DISPATCH"); route(RELAY); exit; }
# Try next destionations in failure route failure_route[RTF_DISPATCH] { if (t_is_canceled()) { exit; } # next DST - only for 500 or local timeout if (t_check_status("500") or (t_branch_timeout() and !t_branch_replied())) { if(ds_next_dst()) { xdbg("--- SCRIPT: retrying to <$ru> via <$du> (attrs: $xavp(_dsdst_=>attrs))\n"); t_on_failure("RTF_DISPATCH"); route(RELAY); exit; } } }
dispatcher.list # setid(int) destination(sip uri) flags(int,opt) priority(int,opt) attrs(str,opt) 1 sip:10.148.0.31:5123 http://10.148.0.31:5123 1 sip:10.148.0.44:5123 http://10.148.0.44:5123
Thanks, Warawich
Kamailio - Users Mailing List - Non Commercial Discussions
- sr-users@lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to the sender! Edit mailing list options or unsubscribe: