13 Nov
2014
13 Nov
'14
11:10 a.m.
Morning Paul:
Thanks a million, mate!
So, if I understood correctly, in the:
if (!t_relay()) {
sl_reply_error();
!t_relay will check the error condition in sending out the stateful message. However, in
this code snippet, t_relay is not explicitly called. Therefore, as in
kamailio-advanced-config, route[relay] should be performing this.
But it is not the case. Instead the main routing block first calls several other routes:
route(REQINIT);
route(NATDETECT);
and then # CANCEL processing
if (is_method("CANCEL")) {
if (t_check_trans()) ????????
t_relay();
exit;
Please forgive my ignorance, but I am baffled here.
The next occurrence of t_relay is:
if ( is_method("ACK") ) {
if ( t_check_trans() ) {
# no loose-route, but stateful ACK;
# must be an ACK after a 487
# or e.g. 404 from upstream server
t_relay();
exit;
Many anticipatory thanks again!
Have an awesome day!
Zaka
________________________________________
From: sr-users-bounces(a)lists.sip-router.org [sr-users-bounces(a)lists.sip-router.org] on
behalf of Paul Smith [paul.smith(a)claritytele.com]
Sent: Thursday, November 13, 2014 9:38 AM
To: sr-users(a)lists.sip-router.org
Subject: Re: [SR-Users] Kamailio Routing Logic
Hi Zaka,
The stageful forwarding takes place in the t_relay() function. If relaying is unsuccessful
then an error is returned and the conditional block executed to send an error back to the
originator using sl_reply_error().
Your other question is about why to use the call to route(1): Yes you could just put the
content of route[1] into the main route block and it would work fine. In more complex
scripts it is neater to put code which is executed in lots of different place into a
separate block and then call the block. That way if you need to modify that code you only
have one place to maintain. The t_relay() function is a good example of a block of
functionality that is reached from loads of places … so generally a route[relay] block is
a good idea.
Paul Smith
On 13 Nov 2014, at 07:52, Zaka Ul Isam <Zaka.Ul(a)albtelecom.al> wrote:
Hello Friends and Gurus:
I am struggling with routing and need a bit of clarification WRT following:
route {
if ($fU=="601"&&is_method("INVITE"))
record_route();
rewritehost("10.0.10.111"); //SS IP
route(1);
}
route[1] {
# send it out now; use stateful forwarding as it works reliably
# even for UDP2TCP
if (!t_relay()) {
sl_reply_error();
};
exit;
}
* In the above stateful forwarding what is the rationale of calling route (1) within main
route block? Could the t_relay statement afyer rewriting the host part of URI not have
performed the stateful forwarding?
** In route[1] there is is only an expression abt logical not condition about t_relay()
(if methods in this function are not invoked??)
I wonder where exactly is stateful forwarding taking place?
1- Is it the default action?
2- Or in function sl_reply_error()?
Thanks a lot in advance!
Zaka
________________________________
Albtelecom & Eagle Mobile invite you to protect together the Environment. Please do
not print the e-mail unless really necessary.
Albtelecom & Eagle Mobile iu ftojnë të mbrojmë së bashku Mjedisin. Lutemi të mos e
printoni këtë komunikim elektronik nëse nuk është vërtet i nevojshëm.
________________________________
This e-mail and any files transmitted with it are confidential and intended solely for
the use of the addressee/s. If you are not the intended recipient you are hereby notified
that any dissemination, forwarding, copying or use of any of the information is strictly
prohibited. If you receive this e-mail in error, please notify the sender immediately and
delete it! Albtelecom makes no warranty as to the accuracy or completeness of any
information contained in this message and hereby excludes any liability of any kind for
the information contained therein or for the information transmission, reception, storage
or use of such in any way whatsoever. The opinions expressed in this message may belong to
sender alone and may not necessarily reflect the opinions of Albtelecom. Albtelecom shall
bear no liability for any loss or damage caused by software or e-mail viruses.
Ky mesazh dhe çdo informacion i transmetuar në përmbajtje te këtij mesazhi është
konfidencial dhe është i destinuar vetëm për marrësin e destinuar. Nëse nuk jeni marrësi i
destinuar, Ju bëjmë me dije se çdo përhapje, transmetim, kopjim apo përdorim i çdo
informacioni është i ndaluar. Nëse e merrni këtë mesazh gabimisht, ju lutem kontaktoni
urgjentisht nisësin e tij dhe fshijeni atë. Albtelecom nuk jep asnjë garanci për saktësinë
apo plotësinë e informacionit në përmbajtje të këtij mesazhi dhe nuk mban asnjë
përgjegjësi për informacionin e përmbajtur, transmetimin, marrjen, ruajtjen apo përdorimin
e tij në çfarëdolloj mënyre. Mendimet e shprehura në këtë mesazh mund t'i përkasin
vetë nisësit dhe nuk mund të reflektojnë domosdoshmërisht qëndrimet e Albtelecom.
Albtelecom nuk do të mbaje asnjë përgjegjësi për humbje ose dëme te shkaktuara nga
programet apo viruset.
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users