3 Mar
2007
3 Mar
'07
7:36 a.m.
Well, first of all a SER server does not generate messages it only
interprets the messages it receives. so it can not generate INVITE messages.
so if you want to call several clients from one client, this one has to
initiate the call by sending an INVITE to SER.
When receiving the INVITE message, SER will forward it to the callees. i did
not try this yet, but i think that you can do this with the method :
"forward" as follows:
if(method == INVITE) {
forward("callee1_IP_address","callee1_port");
forward("callee2_IP_address","callee2_port");
forward("callee3_IP_address","callee3_port");
#and so on ...
}
try this for example... and let me know if it works or not.
ps: (personnally i think it won't work :p)
2007/3/3, Goh, Tee-Yong <gohty(a)m1.com.sg>sg>:
Hi Karim,
Yes you are right.
Please advice.
Thank you.
Regards,
Howard
-----Original Message-----
*From:* karim basraoui [mailto:basraouik@gmail.com]
*Sent:* Saturday, March 03, 2007 8:01 PM
*To:* Goh, Tee-Yong
*Cc:* serusers(a)lists.iptel.org
*Subject:* Re: [Serusers] SIP SER
So if i understand, when a clint registers, SER will automatically send
invites to the other clients and make connections with them?
2007/3/3, Goh, Tee-Yong < gohty(a)m1.com.sg>gt;:
--
BASRAOUI Karim
www.basraouik.afrikart.net
Dear Karim,
Thank you for your reply.
Yes you are right. I have having difficulty searching for this for past
2 months.
Yes. Here is what i want. Once i receive the REGISTER messages, my SER
will send out "INVITE" message to my other clients. This is what i am
intended to do. However, i could not search for the right coding inside the
ser-0.9.6.
Please advice and apologies if any inconvenience caused for you.
Thanks.
Regards,
Howard
-----Original Message-----
*From:* karim basraoui [mailto:basraouik@gmail.com]
*Sent:* Saturday, March 03, 2007 7:18 PM
*To:* Goh, Tee-Yong
*Subject:* Re: [Serusers] SIP SER
Hi,
Do you want to make changes on SER behaviour when it receives REGISTER
messages. If it's the case you can make a condition in the "ser.cfg"
file, in the bloc "route{ ... }". for example:
route {
if (method == "REGISTER")
{ #what you want to do};
}
2007/3/3, Goh, Tee-Yong <gohty(a)m1.com.sg >:
--
BASRAOUI Karim
www.basraouik.afrikart.net
------------------------------
This email (including any attachment) is subject to the following
disclaimer: http://m1.com.sg/M1/misc/disclaimer
------------------------------
Hi,
May i know from the SER-0.9.6, where can i look for and make changes
for the SER when receiving "REGISTER" message and responsing " 200
OK" back
to the corresponding node or clients?
Would appreciate your assistance and advice as soon as possible as i
have difficultly locating the coding. Please advice where i can find the
script to edit the above mentioned messages.
Apologies for the inconvenience caused.
Thank you.
Regards,
Howard
------------------------------
This email (including any attachment) is subject to the following
disclaimer: http://m1.com.sg/M1/misc/disclaimer
------------------------------
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
--
BASRAOUI Karim
www.basraouik.afrikart.net
------------------------------
This email (including any attachment) is subject to the following
disclaimer: http://m1.com.sg/M1/misc/disclaimer
------------------------------