10 Feb
2011
10 Feb
'11
9:11 a.m.
But this is how the code it is!
Can you provide more details about which version of the code are you using?
And which modules?
Are you using the kamailio modules or the ser version of nathelper.
Regards,
Ovidiu Sas
On Thu, Feb 10, 2011 at 8:58 AM, Emil Kroymann <emil.kroymann(a)isaco.de> wrote:
I already added the log statements for late offer and
answer and checked
that the messages where present in the ser logs. Also, I checked the
communication between sip-router and rtpproxy with ngrep. For the
200 OK, sip-router sends the 'U' command to rtpproxy and for the ACK
sip-router sends the 'L' command to rtpproxy, but with from- and to-tag
in the other order, as described in the initial mail in this thread. If
there was something wrong with the calls to rtpproxy_offer() and
rtpproxy_answer() in the sip-router script, the sent command codes
should be different, right?
Also, I could fix the problem in our development environment by building
the nathelper module with the following patch applied:
--- a/modules_s/nathelper/nathelper.c
+++ b/modules_s/nathelper/nathelper.c
@@ -2140,7 +2140,7 @@
LOG(L_ERR, "ERROR: force_rtp_proxy2: can't get From
tag\n");
FORCE_RTP_PROXY_RET (-1);
}
- if (flookup != 0 || (msg->first_line.type == SIP_REPLY && offer != 0))
{
+ if (flookup != 0 || (msg->first_line.type == SIP_REPLY && offer != 0)
|| (msg->first_line.type == SIP_REQUEST && offer == 0)) {
if (to_tag.len == 0) {
FORCE_RTP_PROXY_RET (-1);
}
With this patch applied the order of arguments send to rtpproxy is the
same for 200 OK and for ACK.
Regards,
Emil
Am Thu, 10 Feb 2011 08:06:43 -0500
schrieb Ovidiu Sas <osas(a)voipembedded.com>om>:
Add some logs (print the message that you are
processing and the rtp
command that you are issuing).
That should help you in troubleshooting your scenario.
Regards,
Ovidiu Sas
On Thu, Feb 10, 2011 at 4:55 AM, Emil Kroymann
<emil.kroymann(a)isaco.de> wrote:
--
Emil Kroymann
VoIP Services Engineer
Email: emil.kroymann(a)isaco.de
Tel: +49-30-203899885
Mobile: +49-176-38389303
ISACO GmbH
Kurfürstenstraße 79
10787 Berlin
Germany
Amtsgericht Charlottenburg, HRB 112464B
Geschäftsführer: Daniel Frommherz
Hi,
yeah, the script does call rtp_offer for 200 OK and rtp_answer for
ACK. So, no problem there.
Emil
Am Thu, 10 Feb 2011 09:46:04 +0100
schrieb Carsten Bock <lists(a)bock.info>fo>:
Hi,
just a hint: If you use rtpoffer/answer for SDP in 200ojk/ACK, the
SDP-Offer is in the 200 OK, so you need to call "rtp_offer" for the
200 OK instead of the usual "rtp_answer" for the 200 OK. The
ACK/SDP contains then the rtp_answer.
Works like a charm for me....
Carsten
2011/2/10 Emil Kroymann <emil.kroymann(a)isaco.de>de>:
> When I checked the code of the nathelper module that we are
> using, it didn't seem to be the case, that to and from tags are
> switched for the ACK request. Maybe, something has been changed
> after the point we checked out sip-router. When was this code
> last changed?
>
> Am Wed, 9 Feb 2011 12:51:29 -0500
> schrieb Ovidiu Sas <osas(a)voipembedded.com>om>:
>
>> The code seems to be correct. The to and from tags are switched
>> for:
>> - reply with offer (200ok with first SDP)
>> - request with answer (ACK with second SDP)
>>
>> Are you sure that you are properly invoking offer/answer
>> rtpproxy functions?
>>
>>
>> Regards,
>> Ovidiu Sas
>>
>> On Wed, Feb 9, 2011 at 11:48 AM, Emil Kroymann
>> <emil.kroymann(a)isaco.de> wrote:
>> > Hi,
>> >
>> > We recently had a problem with the nathelper module and
>> > rtpproxy in a scenario where the SDP offer is sent only in
>> > the 200 OK. We use sip-router 3.1 and rtp-proxy from git
>> > master. The sip-router configuration uses the
>> > rtpproxy_offer() and rtpproxy_answer() functions in
>> > appropriate places. The problem is, that the arguments sent
>> > to the rtpproxy, when the ACK with the sdp answer arrives,
>> > seems to be not in the order, that rtpproxy expects.
>> >
>> > On the 200 OK, the nathelper module sends callid, to-tag,
>> > from-tag to rtpproxy. On the ACK, the nathelper module sends
>> > callid, from-tag, to-tag (with different command prefixes, of
>> > course, but I cannot remember them atm). The version of
>> > rtpproxy that we are using seems to expect, that the order of
>> > arguments sent on the ACK request is the same as on the 200
>> > OK.
>> >
>> > My question: are there any module parameters, to correct this
>> > behaviour?
>> >
>> > Regards,
>> >
>> > Emil
>> > --
>> > Emil Kroymann
>> > VoIP Services Engineer
>> >
>> > Email: emil.kroymann(a)isaco.de
>> > Tel: +49-30-203899885
>> >
>> > ISACO GmbH
>> > Kurfürstenstraße 79
>> > 10787 Berlin
>> > Germany
>> >
>> > Amtsgericht Charlottenburg, HRB 112464B
>> > Geschäftsführer: Daniel Frommherz
>> >
>> >
>> > _______________________________________________
>> > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users
>> > mailing list sr-users(a)lists.sip-router.org
>> > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>> >
>> >
>>
>
>
>
> --
> Emil Kroymann
> VoIP Services Engineer
>
> Email: emil.kroymann(a)isaco.de
> Tel: +49-30-203899885
> Mobile: +49-176-38389303
>
> ISACO GmbH
> Kurfürstenstraße 79
> 10787 Berlin
> Germany
>
> Amtsgericht Charlottenburg, HRB 112464B
> Geschäftsführer: Daniel Frommherz
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users
> mailing list sr-users(a)lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
--
Emil Kroymann
VoIP Services Engineer
Email: emil.kroymann(a)isaco.de
Tel: +49-30-203899885
Mobile: +49-176-38389303
ISACO GmbH
Kurfürstenstraße 79
10787 Berlin
Germany
Amtsgericht Charlottenburg, HRB 112464B
Geschäftsführer: Daniel Frommherz