17 Jul
2020
17 Jul
'20
1:37 a.m.
Thanks for the replies.
By following the command kamailio -c -f kamailio i managed to correct all
the mistakes and now i have Kamailio running with Siremis. Unfortunately i
am not able to place any call anywhere. No error is reported, but the call
hangs there. Even if i press end call, softphones get hanged for around 1
minute!
i do not receive 200OK. Here is the print screen of the call. 192.168.1.7
is one of the softphones and 192.168.1.213 is the Kamailio with Freeswitch
system.
[image: image.png]
I am attaching the kamailio.cfg
Not able to make calls between extensions.
On Thu, Jul 16, 2020 at 10:51 PM Karsten Horsmann <khorsmann(a)gmail.com>
wrote:
Hi,
Between the howto version and today actual version of Kamailio are many
changes that can generate errors (due for example rename or new module
params in kamailio). So copy paste an howto works not out of the box (if
it's not exactly what the author used).
Start with the shipped default config, then try to adopt the logic step by
step with
kamailio -c -f /etc/kamailio/kamailio.cfg is a great place to check Syntax
fails.
And which Kamailio version you use is also a good way to to describe your
issue.
Cheers
Karsten
David Villasmil <david.villasmil.work(a)gmail.com> schrieb am Do., 16. Juli
2020, 15:33:
What we need are the errors :)
On Thu, 16 Jul 2020 at 13:46, John Tuxies <atuxnull(a)gmail.com> wrote:
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Trying to setup Kamailio with Freeswitch in a
Debian machine as in the
http://kb.asipto.com/freeswitch:kamailio-3.3.x-freeswitch-1.2.x-sbc,
but Kamailio fails to start and gives a ton of errors.
Before of the alterations Kamailio and Siremis start correctly and i can
easily create users through Siremis. After the changes to include
Freeswitch's blocks, it fails to start. All run in the same machine with IP
192.168.1.213.
I am attaching kamailio.cfg (named as test1.txt) if someone could spot
the error, please. Also i am attaching the kamailio.cfg(Original1.txt) when
it was working fine with Siremis.
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Regards,
David Villasmil
email: david.villasmil.work(a)gmail.com
phone: +34669448337
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
