Hi, I have one question. I intend to use asterisk and ser in the same server. I use Ser like a SIP server, while Asterisk is only a voicemail. After SIPphone register with SER, if the callee don't reply after few seconds. I forward the call to Asterisk voicemail. I use some function in avpops.so to make the forward, example: +avp_db_load: to look in table preference the user who i set "fwdonbusy" or "fwdnoanswer" +avp_check +avp_pushto: to push AVP into SIP message, i can foward the message to Asterisk. The problem is that if i can't change the port of message to the Asterisk. So if i use SER+Asterisk in the same server. Both will use port 5060, then it can't run at all. Do you have some solutions for this problem? Thank you so much. P/s: if i use "forward", i will miss the problem with NAT or after that Asterisk can't talk directly to SIPphone.
On 11/1/05, Juha Heinanen jh@tutpro.com wrote:
Daryl Sanders writes:
Have a look at the call forwarding example ser.cfg from onsip.orghttp://onsip.org.
I
just added the IP address of my Asterisk box to the user_preferences table and it worked without problems.