Thanks Jan.
I did as it appears in,
http://cvs.berlios.de/cgi-bin/viewcvs.cgi/ser/sip_router/etc/nathelper.cfg?r ev=HEAD
When i introduce the code as it specified in the nathelper.cfg
modparam("nathelper", "ping_nated_only", 1) # Ping only clients behind
-- set_mod_param_regex: parameter <ping_nated_only> not found in module <nathelper> parse error (100,43-44): Can't set module parameter
if (nat_uac_test("3")) {
-- unknown command, missing hodule
-rwxr-xr-x 1 827 827 120363 Nov 21 12:10 nathelper.so -- I hope this is the latest module in nathelper.so
Am I doing in right way?
Kannaiyan
----- Original Message -----
From: "Jan Janak" jan@iptel.org To: "Kannaiyan Natesan" nkans@lycos.co.uk Cc: serusers@lists.iptel.org Sent: Monday, December 08, 2003 6:28 PM Subject: Re: [Serusers] Nathelper cfg ?
See sip_router/etc/nathelper.cfg. The config file below is incomplete (you do not rewrite contacts, for example).
Jan.
On 08-12 13:23, Kannaiyan Natesan wrote:
My script has following information regarding NAT,
I have installed RTPProxy and I cannot hear any communication between
the
phones.
Here is my configuration,
# global parameters
mhomed=yes
# Nathelper loadmodule "/usr/local/lib/ser/modules/nathelper.so"
# Parameter section
modparam("nathelper","natping_interval", 10)
# Routing section route {
..... if( method=="INVITE") { record_route(); force_rtp_proxy(); /* set up reply processing */ t_on_reply("1"); }; .... }
#route leg # all incoming replied for t_onreplied transactions enter here onreply_route[1] { if( status =~"[12][0-9][0-9]" ){ force_rtp_proxy(); }; }
Can anyone please help me what should I need to do further to call
between
my Cisco ATA 186 and X-lite.
Best Regards, Kannaiyan
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers