1 Dec
2009
1 Dec
'09
4:50 a.m.
yes it does:
[root@atl-sipgateway1 ~]# ip addr show dev eth0
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:1e:c9:b6:4c:fa brd ff:ff:ff:ff:ff:ff
inet 67.220.XX.XX/27 brd 67.220.XX.XX scope global eth0
inet 67.220.XX.XX/27 brd 67.220.XX.XX scope global secondary eth0:1
inet6 fe80::21e:c9ff:feb6:4cfa/64 scope link
valid_lft forever preferred_lft forever
On Mon, Nov 30, 2009 at 12:15 PM, Alex Hermann <alex(a)speakup.nl> wrote:
On Sunday 29 November 2009 20:57:59 Geoffrey Mina
wrote:
I have a Kamailio machine that has multiple IPs
assigned to a single
interface.
eth0 = 1.2.3.4
eth0:1 = 1.2.3.5
No idea if it has any influence on Kamailio behaviour, but those seem to be
two interfaces as far as applications are concerned. Assigning multiple IP's
to one interface means that for all IP's, the interface should be the same.
Does 'ip addr show dev eth0' show 2 IP's?
--
Alex Hermann
_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users(a)lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users