Hi,
I configure SER with Mysql. After I start SER, it don't show "successful" word, and can't end. No UA can register to SER. I found when UA sends Register message, it can't receive any response. But I use serctl command to monitor SER, I can't find any error. After I restart Linux again, Linux'start process is blocked when it is starting ser. My Linux op can't be started. That's horrible.
Furthermore, After I configure SER with Mysql, I configure SER without Mysql again, SER also can't start nomally. The only way is to remove it and restall it.
Can you help me!! Thanks.
My ser.cfg is as following: # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script #
# ----------- global configuration parameters ------------------------
#debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E)
# Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes
check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo"
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so"
loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so"
# Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
#modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2)
# -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password")
# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with # max_forwards==0, or excessively long requests #if (!mf_process_maxfwd_header("10")) { # sl_send_reply("483","Too Many Hops"); # break; #}; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; };
# we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; };
# if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri=~"127.0.0.1") {
if (method=="REGISTER") {
# Uncomment this if you want to use digest authentication # if (!www_authorize("127.0.0.1", "subscriber")) { # www_challenge("127.0.0.1", "0"); # break; # };
save("location"); break; };
# native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); };
}
jenny xueyou38@163.com 2005-04-01