11 Sep
2015
11 Sep
'15
1:16 p.m.
Hello,
I will adjust the tutorial to make the note about PUBLISH looping back
and need to authorize it by IP check.
Regarding "db_mode", are you referring to "subs_db_mode" parameter?
Cheers,
Daniel
On 11/09/15 09:17, huseyin kalyoncu wrote:
Hi
After some struggling i solved the problem. It turns out that Kamailio
was sending 407 for PUBLISH messages
which sent to itself by itself :) and because of that it was not
relaying PUBLISH messages. It is a very strange behaviour and hard to
recognize
without a proper debug output.
I fixed the problem with adding following check to the AUTH route block:
if (is_method("PUBLISH") && src_ip=="MY_IP_ADDRESS")
{
return;
}
After adding this, BLF is working normally with the conf given in the
tutorial which was i mentioned in my previous message.
Btw. there is another problem whith BLF when i change db_mode of
presence module from 2 to 3. It gives strange duplicate key errors
about presentity table and the light remains red constantly after
hangup the call.
I will try to send those db error messages to this thread later when i
have time.
Thanks
Huseyin
On Fri, Sep 11, 2015 at 10:04 AM, Daniel-Constantin Mierla
<miconda(a)gmail.com <mailto:miconda@gmail.com>> wrote:
Hello,
have you captured the traffic on loopback network interface? Try
also to run with debug=3 in kamailio.cfg.
Cheers,
Daniel
On 10/09/15 22:44, huseyin kalyoncu wrote:
--
Daniel-Constantin Mierla
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Book: SIP Routing With Kamailio - http://www.asipto.com
Kamailio Advanced Training, Sep 28-30, 2015, in Berlin - http://asipto.com/u/kat
Hi
I am trying to implement BLF functionality as described
in http://kb.asipto.com/kamailio:presence:k43-blf.
I am using the same conf with the one in the tutorial except that
i am using postgres database instead of mysql.
The problem is BLF is not working with this config (presence
server and proxy server are in the same kamailio with same IP).
But when I separate presence server from proxy server (2
different kamilio boxes with different IPs) BLF working perfect.
i can see PUBLISH & NOTIFY messages in the tcpdump output with
the working configuration.
But i can not see any PUBLISH messages in the tcpdump output with
the original config (one with presence and proxy servers are same).
My question
in the normal working environment (when BLF working perfectly);
should i see PUBLISH and NOTIFY messages in the tcpdump output
when the presence and proxy servers are the same?
thanks
Huseyin
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla
http://twitter.com/#!/miconda <http://twitter.com/#%21/miconda> -
http://www.linkedin.com/in/miconda
Book: SIP Routing With Kamailio - http://www.asipto.com
Kamailio Advanced Training, Sep 28-30, 2015, in Berlin - http://asipto.com/u/kat
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
list
sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users