Re: [Serusers] 404 Not Found

Could you post the whole configuration file ? What version of ser are you using ? Do you have "use_domain" parameters set to 1 ? If so then set them to 0 and retry.

Jan.

On 24-02 11:13, Eduard San Anselmo Mateu wrote:

Hi all.

I'm testing the very basic functionalities of SER as a proxy with two soft phones, one for Windows (phone@albasoft.com) and one for Linux (phone2@albasoft.com). The proxy is at 192.168.0.15.

There's no problem with phone -> phone2 communication, but no way in establishing phone2 -> phone: I always get the following message:

404, Not Found.

As I have been able to see with Ethereal, phone2 tries to INVITE sip:phone@192.168.0.15:5060, and the proxy responds by saying it can't find such user (but user sip:phone@albasoft.com is indeed registered!). I think the problem is the :5060 part, but I'm not sure.

Can anybody help me?. Thans in advance.

Oh, yes, my config file (as you will see, it's the simplest):

listen=192.168.0.15 alias=albasoft.com alias=albasoft.com:5060 alias=192.168.0.15 alias=192.168.0.15:5060

route{

    # initial sanity checks -- messages with
    # max_forwards==0, or excessively long requests
    if (!mf_process_maxfwd_header("10")) {
            sl_send_reply("483","Too Many Hops");
            break;
    };
    if (msg:len >=  max_len ) {
            sl_send_reply("513", "Message too big");
            break;
    };


    # we record-route all messages -- to make sure that
    # subsequent messages will go through our proxy; that's
    # particularly good if upstream and downstream entities
    # use different transport protocol
    #if (!method=="REGISTER") record_route();


    # subsequent messages withing a dialog should take the
    # path determined by record-routing
    if (loose_route()) {
            # mark routing logic in request
            append_hf("P-hint: rr-enforced\r\n");
            route(1);
            break;
    };


    if (!uri==myself) {
            # mark routing logic in request
            append_hf("P-hint: outbound\r\n");
            route(1);
            break;
    };


    # if the request is for other domain use UsrLoc
    # (in case, it does not work, use the following command
    # with proper names and addresses in it)
    if (uri==myself) {


            if (method=="REGISTER") {

# Uncomment this if you want to use digest authentication # if (!www_authorize("iptel.org", "subscriber")) { # www_challenge("iptel.org", "0"); # break; # };

                    save("location");
                    break;
            };


            lookup("aliases");
            if (!uri==myself) {
                    append_hf("P-hint: outbound alias\r\n");
                    route(1);
                    break;
            };


            # native SIP destinations are handled using our USRLOC DB
            if (!lookup("location")) {
                    sl_send_reply("404", "Not Found");
                    break;
            };
    };
    append_hf("P-hint: usrloc applied\r\n");
    route(1);

}

route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; }

Eduard San Anselmo

---

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers