Re: [Serusers] Remote Party ID

rpid is fetched from db during an authentication check. so, if you don't have any authentication before append_rpid_hf(), we will not have any

bogdan Charles Galea wrote: >We have downloaded the latest ser software from cvs in order to >support appending of remote party id while using mysql as the ser >database. >After compiling and installing the ser software we included the auth >and auth_db parameters and also the append_rpid_hf() function in our >ser.cfg file as shown below. > >SER server starts and registration is successfull however when >forwarding to the pstn gateway, ser will not append the remote party >id header, even if the rpid and uri columns in mysql database are >populated accordingly using the serctl add rpid command. Calls are >also successfull however the gateway will not include the calling >party number in the setup message because the rpid header is missing. > > >Any ideas please? > >Thanks > >Charles and Andrew > > > ># ----------- global configuration parameters ------------------------ > >#debug=3 # debug level (cmd line: -dddddddddd) >#fork=yes >#log_stderror=no # (cmd line: -E) > >/* Uncomment these lines to enter debugging mode >debug=7 >fork=no >log_stderror=yes >*/ > >check_via=no # (cmd. line: -v) >dns=no # (cmd. line: -r) >rev_dns=no # (cmd. line: -R) >#port=5060 >#children=4 >fifo="/tmp/ser_fifo" > ># ------------------ module loading ---------------------------------- > >loadmodule "/our_downloads/sip_router/modules/mysql/mysql.so" >#loadmodule "//lib/ser/modules/mysql.so" > >loadmodule "//lib/ser/modules/sl.so" >loadmodule "//lib/ser/modules/tm.so" >loadmodule "//lib/ser/modules/rr.so" >loadmodule "//lib/ser/modules/maxfwd.so" >loadmodule "//lib/ser/modules/usrloc.so" >loadmodule "//lib/ser/modules/registrar.so" >loadmodule "//lib/ser/modules/textops.so" > ># Uncomment this if you want digest authentication ># mysql.so must be loaded ! >loadmodule "//lib/ser/modules/auth.so" >loadmodule "//lib/ser/modules/auth_db.so" > > >#loadmodule "//lib/ser/modules/acc.so" > ># ----------------- setting module-specific parameters --------------- > ># -- usrloc params -- > >#modparam("usrloc", "db_mode", 0) > ># Uncomment this if you want to use SQL database ># for persistent storage and comment the previous line >modparam("usrloc", "db_mode", 1) > > > ># -- auth params -- > > >modparam("auth_db", "use_rpid", 1) >modparam("auth_db", "rpid_column", "rpid") >modparam("auth", "rpid_prefix", "<sip:") >modparam("auth", "rpid_suffix", >"@testphone.com>:party=calling;screen=no;privacy=off") > > > > ># Uncomment if you are using auth module ># >modparam("auth_db", "calculate_ha1", yes) ># ># If you set "calculate_ha1" parameter to yes (which true in this >config), ># uncomment also the following parameter) ># >modparam("auth_db", "password_column", "password") > ># -- rr params -- ># add value to ;lr param to make some broken UAs happy >modparam("rr", "enable_full_lr", 1) > > > ># ------------------------- request routing logic ------------------- > ># main routing logic > >route{ > > # initial sanity checks -- messages with > # max_forwards==0, or excessively long requests > if (!mf_process_maxfwd_header("10")) { > sl_send_reply("483","Too Many Hops"); > break; > }; > if ( msg:len > max_len ) { > sl_send_reply("513", "Message too big"); > break; > }; > > > > > # we record-route all messages -- to make sure that > # subsequent messages will go through our proxy; that's > # particularly good if upstream and downstream entities > # use different transport protocol > record_route(); > # loose-route processing > if (loose_route()) { > t_relay(); > break; > }; > > > # if the request is for other domain use UsrLoc > # (in case, it does not work, use the following command > # with proper names and addresses in it) > if (uri=~"testphone.com") { > lookup("aliases"); > if (method=="REGISTER") { > >#Uncomment this if you want to use digest authentication > if (!www_authorize("testphone.com", "subscriber")) { > www_challenge("testphone.com", "0"); > append_rpid_hf(); > break; > }; > > > > save("location"); > break; > }; > > > > if (uri=~"^sip:21") { > append_rpid_hf(); > forward(a valid ip address for the gateway was >inserted here); > break; > } > > if (uri=~"^sip:123") { > forward(a valid ip address for the gareway was >inserted here); > break; > } > > > # native SIP destinations are handled using our USRLOC DB > if (!lookup("location")) { > sl_send_reply("404", "Not Found"); > break; > }; > }; > > > > > # forward to current uri now; use stateful forwarding; that > # works reliably even if we forward from TCP to UDP > if (!t_relay()) { > sl_reply_error(); > }; > > >} > > > >------------------------------------------------------------------------ > >_______________________________________________ >Serusers mailing list &gt;serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers > > > >