Hi,
On Wednesday 21 May 2003 23:14, Jamin W. Collins wrote:
The problem comes when one of the phones is not registered properly with the SER proxy and the PBX requests it. The request fails the location lookup and is sent back to the PBX. To correct this I've tried matching the "src_ip" to see if the request is from the PBX however this doesn't appear to work. I have the following condition in the ser.cfg, shouldn't this stop requests from 1.2.3.4 being sent back to 1.2.3.4?
if (!lookup("location")) {
log(1, "Location lookup failure."); if (src_ip=="1.2.3.4") || (src_ip=="1.2.3.6") {
^ ^ ^ ^ Please remove the "" around the IPs. And i'm not sure if the () || () works for an if. Please try (()||()) instead to be safe (optional it should be possible to ommit the brackets around the IP compares e.g. (||) ).
log(1, "Request from first server."); sl_reply_error(); } else { rewritehost("1.2.3.4"); log (1, "Sending request to the first server."); t_on_negative("1"); t_relay();
This statement causes the behavior you are describing. You set the destination to 1.2.3.4 and rely it.
Regards Nils Ohlmeier
}; break;};