3 Jun
2014
3 Jun
'14
12:59 a.m.
Hi,
This time round I tried with outbound module, however I am still getting
timeout with SIP registration.
My configuration is meant for users using JSSIP to Kamailio to a SIP trunk
end point. From JSSIP user will key in their SIP trunk accounts inside SIP
URI and SIP password and my Kamailio websocket IP.
Here's my config gist: https://gist.github.com/steve-ng/1d8fde8402c6e5f237bc
Any insights to where did I go wrong?
Thanks!
On Sun, Jun 1, 2014 at 10:30 PM, Steve Ng <steveng.1988(a)gmail.com> wrote:
Hi Carlos,
Thanks for the help, I've tried the dispatcher module to no avail, this
time round I've attached my config gist at
https://gist.github.com/steve-ng/d54b2cd14ad6500c1ed0
I followed primarily from https://gist.github.com/jesusprubio/4066845
where I could use JSSIP to talk to another JSSIP user if their sip uri is
my address.
However if I use the sip trunk end point eg. sip:1001@siptrunk.xxx.com,
it wouldn't work. JSSIP would be stuck at the connected status until
timeout with the error: *SIP registration error: Request Timeout.*
I've followed http://kamailio.org/docs/modules/1.4.x/dispatcher.html the
use of dispatcher and at line 473 and 474 with the forward.
The file /usr/local/etc/kamailio/dispatcher.list is something like:
# proxies 2 sip:siptrunk.xxx.com
Any advice? thanks!
On Sun, Jun 1, 2014 at 12:05 AM, Carlos Ruiz Díaz <
carlos.ruizdiaz(a)gmail.com> wrote:
On Sat, May 31, 2014 at 9:45 AM, Steve Ng <steveng.1988(a)gmail.com> wrote:
> Regards
> On Sat, May 31, 2014 at 10:10 PM, Carlos Ruiz Díaz <
> carlos.ruizdiaz(a)gmail.com> wrote:
>> Just proxy the authentication to
their SIP providers, and let kamailio
>> put itself in the path so it can bridge between UDP (probably) and WS
>> transport.
> >> You can use dispatcher,
carrierroute, whatever module you want. The
>> only non-ordinary thing here are the UA's communicating via websockets, and
>> this scenario can be handled with websockets module. Maybe this example can
>> suit you [1].
> >> [1]
https://github.com/caruizdiaz/kamailio-ws
> >> Regards
> > >> On Sat, May 31, 2014 at 7:43 AM, Steve Ng
<steveng.1988(a)gmail.com >> wrote:
> >>> Hi,
>> >>> My users are from a
web application using JSSIP. They each have a sip
>>> trunk account, which could be from any provider. JSSIP would connect to
>>> Kamailio's websocket server passing the SIP trunk credential information
>>> and Kamailio will relay it to that specific sip trunk provider?
>> >>> Is there anyway that I
could use Kamailio as the middleman? Is it a
>>> combination of dispatcher module and websocket module?
>> >>> Thanks!
>> >>> Regards,
>>> Steve
>> >>>
_______________________________________________
>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>>> sr-users(a)lists.sip-router.org
>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>> >> > > >> --
>> Carlos
>> http://caruizdiaz.com
>> http://ngvoice.com
>> +52 55 3048 3303
> >>
_______________________________________________
>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>> sr-users(a)lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
> > >
_______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users(a)lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Carlos
http://caruizdiaz.com
http://ngvoice.com
+52 55 3048 3303
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Hi,
I've managed to set up WS, users with JSSIP can connect to Kamailio
after reading up on the websocket module documentation.
However, the proxying part of authentication to SIP provider through
Kamailio is something that I need advice on (how to set in the config how).
I don't know your variables, but setting Kamailio as outbound proxy for
all requests coming from your webrtc UA could make the trick.
Do you have any config that do something like this to share?