Hi Lazer,
thanx for taking the time to answer my question.
when i try to run openser i get the following errors . how do i debug them ? this is my first time using version 1.1.x
Try with 1.2.x version.
Regards.
Saludos JesusR.
[root@IPX100 openser]# openser -f openser.cfg 0(9514) loading module /usr/lib/openser/modules/sl.so 0(9514) loading module /usr/lib/openser/modules/tm.so 0(9514) loading module /usr/lib/openser/modules/rr.so 0(9514) loading module /usr/lib/openser/modules/maxfwd.so 0(9514) loading module /usr/lib/openser/modules/usrloc.so 0(9514) loading module /usr/lib/openser/modules/registrar.so 0(9514) loading module /usr/lib/openser/modules/textops.so 0(9514) loading module /usr/lib/openser/modules/uac_redirect.so 0(9514) set_mod_param_regex: usrloc matches module usrloc 0(9514) set_mod_param_regex: found <db_mode> in module usrloc [/usr/lib/openser/modules/usrloc.so] 0(9514) set_mod_param_regex: rr matches module rr 0(9514) set_mod_param_regex: found <enable_full_lr> in module rr [/usr/lib/openser/modules/rr.so] 0(9514) find_cmd_export_t: found <mf_process_maxfwd_header>(1) in module maxfwd [/usr/lib/openser/modules/maxfwd.so] 0(9514) find_cmd_export_t: found <sl_send_reply>(2) in module sl [/usr/lib/openser/modules/sl.so] 0(9514) find_cmd_export_t: found <sl_send_reply>(2) in module sl [/usr/lib/openser/modules/sl.so] 0(9514) find_cmd_export_t: found <record_route>(0) in module rr [/usr/lib/openser/modules/rr.so] 0(9514) find_cmd_export_t: found <loose_route>(0) in module rr [/usr/lib/openser/modules/rr.so] 0(9514) find_cmd_export_t: found <append_hf>(1) in module textops [/usr/lib/openser/modules/textops.so] 0(9514) find_cmd_export_t: found <save>(1) in module registrar [/usr/lib/openser/modules/registrar.so] 0(9514) find_cmd_export_t: found <lookup>(1) in module registrar [/usr/lib/openser/modules/registrar.so] 0(9514) parse error (129,6-7): syntax error 0(9514) parse error (129,6-7): missing '(' or ')' ? 0(9514) parse error (129,6-7): bad command: missing ';'? 0(9514) parse error (129,7-8): bad command (!!!attention: from v1.0.0+ use 'return' instead of 'break'!!!) 0(9514) parse error (129,8-9): bad command (!!!attention: from v1.0.0+ use 'return' instead of 'break'!!!) 0(9514) parse error (129,10-11): bad command (!!!attention: from v1.0.0+ use 'return' instead of 'break'!!!) 0(9514) find_cmd_export_t: found <t_on_failure>(1) in module tm [/usr/lib/openser/modules/tm.so] 0(9514) find_cmd_export_t: found <t_relay>(0) in module tm [/usr/lib/openser/modules/tm.so] 0(9514) find_cmd_export_t: found <sl_reply_error>(0) in module sl [/usr/lib/openser/modules/sl.so] 0(9514) find_cmd_export_t: found <t_check_status>(1) in module tm [/usr/lib/openser/modules/tm.so] 0(9514) find_cmd_export_t: found <t_relay>(0) in module tm [/usr/lib/openser/modules/tm.so] 0(9514) find_cmd_export_t: found <get_redirects>(1) in module uac_redirect [/usr/lib/openser/modules/uac_redirect.so] 0(9514) find_cmd_export_t: found <t_relay>(0) in module tm [/usr/lib/openser/modules/tm.so] 0(9514) parse error (157,1-2): syntax error 0(9514) parse error (157,1-2): ERROR: bad config file (8 errors) 0(9514) DEBUG: tm_shutdown : start 0(9514) DEBUG: tm_shutdown : emptying hash table 0(9514) DEBUG: tm_shutdown : releasing timers 0(9514) DEBUG: tm_shutdown : removing semaphores 0(9514) DEBUG: tm_shutdown : destroying tmcb lists 0(9514) DEBUG: tm_shutdown : done 0(9514) shm_mem_destroy
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); #route(1); }; if (uri==myself) { if (method=="REGISTER") { save("location"); exit; };#this closes the if uri == }
if (!lookup("location")) { route(5); exit; };
## ANYTHING ADDED BELOW CAUSE OPENSER TO CRASH ???####
route[5] { rewritehostport("10.10.10.10:5060"); t_on_failure("1"); route(1); exit; }
route[1] { if (!t_relay()) { sl_reply_error(); }; exit; }
failure_route[1] { if (t_check_status("404")) { rewritehostport("192.168.10.1:5060"); append_branch(); t_relay(); } else { get_redirects("*"); t_relay(); } }
#this closes the route }
On Dec 27, 2007 12:14 PM, Jesus Rodriguez jesusr@voztele.com wrote:
Hi Lazer,
i need a simple config that achieves the following (w/ out a db)
if a user is not registered then all calls should go to a default gw 192.168.10.1
the default gw will only respond w/ a 302 or a 404
if a 302 is received then openser should forward the call on to the new gw listed in the reply
if a 404 is received the call should be forwarded to a different gw
172.16.20.1
if the send gw is done then the call should die.
Try with somehting like this (not tested):
if (!lookup("location")) { route(5); exit; }
route[5] { rewritehostport("192.168.10.1:5060"); t_on_failure("1"); route(1); exit; }
route[1] { if (!t_relay()) { sl_reply_error(); }; exit; }
failure_route[1] { if (t_check_status("404")) { rewritehostport("172.16.20.1:5060"); append_branch(); t_relay(); } else { get_redirects("*"); t_relay(); } }
Saludos JesusR.
here is what i was thinking of but as a newbie i may be off my rocker i seem to get an error
ERROR: t_check_status: cannot check status for a reply which has no T-state established
but again my whole approach may be wrong.
if (!lookup("location")) {rewritehostport ("192.168.10.1:5060"); if (t_check_status("(404)|(480)")) { log("404 or 480 negative reply\n"); rewritehostport ("172.16.20.1:5060"); } else{ t_on_failure("1"); t_relay(); }
failure_route[1] { get_redirects("*"); t_relay();} }
Saludos JesusR.
Jesus Rodriguez VozTelecom Sistemas, S.L. jesusr@voztele.com http://www.voztele.com Tel. 902360305
Saludos JesusR.
------------------------------------ Jesus Rodriguez VozTelecom Sistemas, S.L. jesusr@voztele.com http://www.voztele.com Tel. 902360305 -------------------------------------