Re: [SR-Users] Issue Bug in SEMS (transparent SBC profile)

Hello, Why in SEMS, some changes (in transparent SBC profile) in sip headers do not apply. For example i want to change CSeq or Contact header like this: # transparent SBC profile # defaults: transparent RURI=$r From=$f To=$t Call-ID=$ci_leg2 CSeq=$H(CSeq) Contact=$H(Contact) When I run SEMS, CSeq and Contact do not change, while other headers change. [#7fc688d7b1c0/9379] [onLoad, SBC.cpp:189] INFO: loading SBC call profiles from '/usr/local/etc/sems/etc/' [#7fc688d7b1c0/9379] [readFromConfiguration, SBCCallProfile.cpp:418] INFO: SBC: loaded SBC profile 'mo' - MD5: d6a2c29084043edde1357231f6866737 [#7fc688d7b1c0/9379] [readFromConfiguration, SBCCallProfile.cpp:423] INFO: SBC: RURI = '$r' [#7fc688d7b1c0/9379] [readFromConfiguration, SBCCallProfile.cpp:424] INFO: SBC: RURI-host = '' [#7fc688d7b1c0/9379] [readFromConfiguration, SBCCallProfile.cpp:425] INFO: SBC: From = '$f' [#7fc688d7b1c0/9379] [readFromConfiguration, SBCCallProfile.cpp:426] INFO: SBC: To = '$t' [#7fc688d7b1c0/9379] [readFromConfiguration, SBCCallProfile.cpp:431] INFO: SBC: Call-ID = '$ci_leg2222' [#7fc688d7b1c0/9379] [readFromConfiguration, SBCCallProfile.cpp:434] INFO: SBC: force outbound proxy: yes This issue caused the Asterisk could not pass the Authentication process in "match_req_to_dialog" function because the CSeq is the same as the dialogs. So the Asterisk thought this message was a LOOP message. Has anybody encountered this issue in SEMS? How did you solve this? I know there are some ways for doing this with Kamailio, But i focused on issues in SEMS With Best Regards *-- Mojtaba Esfandiari.S* *-- PhD student and Research Affiliate, * *-- Technical Manager at IP-PBX Laboratory, Ferdowsi University of Mashhad, Iran.* -- Address: IP-PBX Lab., Engineering Faculty, Ferdowsi University Main Campus, Mashhad, Iran. -- Tel: +98-51-38763635 -- Mobile: +98-915-117-6713