4 Apr
2005
4 Apr
'05
4:30 a.m.
The UA could be behind a restricted (or port-restricted or symmetric) NAT. Server B will
not be in the NATs nat-table and incoming INVITEs will not be allowed through.
Try to put the UA on a public IP address to verify that this is what is happening.
g-)
---- Original Message ----
From: Raymond Chen
To: serusers(a)lists.iptel.org
Sent: Monday, April 04, 2005 08:48 AM
Subject: [Serusers] t_replicate can't call to registered endpoint
Dear all
We have setup two SER servers which replicates endpoint registration
info to the second server as follow:
Server A:
if (method=="REGISTER") {
#if (src_ip=="xxx.xxx.xxx.xxx") {
# save("location");
# break;
#};
if (!www_authorize("", "subscriber")) {
www_challenge("", "1");
break;
};
if (!src_ip==xxx.xxx.xxx.xxx) {
t_replicate("xxx.xxx.xxx.xxx",
"5060");
};
save("location");
break;
};
Server B:
save_noreply("location");
registration process went fine. But when we use Server B to call the
replicated endpoint, endpoint does not response to the INVITE
message. Port and IP both are correct in the INVITE message.
What could be the problem?
Regards
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers