14 Jul
2003
14 Jul
'03
10:37 a.m.
I suggest you record-route everything and process record-routing in
beginning of you script after initial sanity checks, i.e.:
addRecordRoute();
rewriteFromRoute();
Even better, upgrade to 8.11 which deprecated strict routing -- an RFC2543
misconception.
Also note, that 'setflag' is never entered -- either the RE match in beggining
does not match and processing skips behing t_relay's bracket or break completes
processing begore setflag is entered.
-jiri
At 03:57 PM 7/14/2003, Andrzej Radke wrote:
Hello !
I have problem with accounting traffic from IP to PSTN gateway
My PSTN gateway is 10.10.10.254
if (uri=~"sip:58[1-2]([0-9]){3}(@(gda\.pl|10\.10\.10\.24)?)" &&
!(src_ip==10.10.10.254/32)) {
addRecordRoute();
strip(2);
if (!t_relay_to("10.10.10.254", "5060")) {
sl_reply_error();
};
break;
setflag(1);
t_relay();
};
I don't have any information about INVITE, BYE in my logs
When the connection is from IP network to IP network
or from PSTN to IP network I have all information what i need.
Where do I have to put addRecordRoute(); and setflag(1) in ser.conf
in this case ?
Greetings
Andrzej Radke
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
--
Jiri Kuthan http://iptel.org/~jiri/