[Serusers] Problems with postgres module in ser-0.9.3

I've been playing with ser for a while checking it in different scenarios. All this time I used it with fork=no log_stderror=yes settings and it worked. Now I've come up with some draft ser.cfg and wanted to run it as daemon. I've changed it to fork=yes log_stderror=no and now ser doesn't start. Actually "log_stderror=no" is the setting that causes problem. If it's set to "yes", ser starts fine even in forked mode. Also I narrowed down the problem to postgres module. If I remove it from ser.cfg then ser starts as it should. With postgres module enabled it doesn't throw a word of complaint to a log and it looks fine from console: root@pg1old:~/src/ser/ser-0.9.3# /usr/local/ser/sbin/ser -f /etc/ser/ser.cfg Listening on udp: 192.168.0.61 [192.168.0.61]:5060 tcp: 192.168.0.61 [192.168.0.61]:5060 Aliases: tcp: pg1old:5060 tcp: pg1old.acecape.com:5060 udp: pg1old:5060 udp: pg1old.acecape.com:5060 *: 192.168.0.61:* but root@pg1old:~/src/ser/ser-0.9.3# ps -auxw | grep ser root 18322 0.0 0.3 38836 1824 ? S 15:05 0:00 /usr/local/ser/sbin/ser -f /etc/ser/ser.cfg shows that there's just one ser process running, netstat shows that it's not listening on any port and also no FIFO file is created. Again everything works fine if "log_stderror" set to "yes". Looks to me as some strange bug. Any clues? Thanks, Michael Ulitskiy