[Serusers] need help to route calls to PSTN

Hello ser users, I configure ser and asterisk on the same box (+nat). I can send and receive calls from my domain or other domains however i can't send uri to pstn : ser listen on port 5060 / public ip asterisk listen 5040 / private address 192.168.0.50 When I dial a number to pstn phone send sip:1234@mydomain:5060 but ser don't rewrite host port according to ser.cfg . What's wrong ? Why ? # $Id: ser.cfg,v 1.27 2005/03/10 14:16:25 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) #memlog=5 # memory debug log level #log_facility=LOG_LOCAL0 # sets the facility used for logging (see syslog(3)) /* Uncomment these lines to enter debugging mode #fork=no #log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" user=root group=ser fifo_user=root # owner of the ser fifo fifo_group=ser fifo_mode=0660 # fifo's permissions #disable_core=yes #disables core dumping #open_fd_limit=1024 # sets the open file descriptors limit #mhomed=yes # usefull for multihomed hosts, small performance penalty #disable_tcp=yes #tcp_accept_aliases=yes # accepts the tcp alias via option (see NEWS) listen=80.119.9.253 # # ------------------ module loading ---------------------------------- loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" loadmodule "/usr/lib/ser/modules/uri.so" loadmodule "/usr/lib/ser/modules/nathelper.so" loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so" loadmodule "/usr/lib/ser/modules/textops.so" loadmodule "/usr/lib/ser/modules/permissions.so" loadmodule "/usr/lib/ser/modules/group.so" loadmodule "/usr/lib/ser/modules/domain.so" loadmodule "/usr/lib/ser/modules/avpops.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params-- modparam("usrloc", "db_mode", 2) # -- autdb_params-- modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # -- nathelper params -- modparam("nathelper", "natping_interval", 30) modparam("nathelper", "ping_nated_only", 1) # -- registrar params -- modparam("registrar", "nat_flag", 6) # -- tm params -- modparam("tm", "fr_inv_timer", 27) modparam("tm", "fr_inv_timer_avp", "inv_timeout") # --domain params -- modparam("domain", "db_mode", 1) # Use caching # -- permissions params -- modparam("permissions", "db_url", "mysql://ser:heslo@localhost/ser") modparam("permissions", "db_mode", 1) modparam("permissions", "trusted_table", "trusted") modparam("permissions", "default_deny_file", "/etc/ser/permissions.deny") modparam("permissions", "default_allow_file", "/etc/ser/permissions.allow") # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len >= max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") { record_route(); }; if (method=="ACK" || method=="BYE") { unforce_rtp_proxy(); }; # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { if (has_totag() && method=="INVITE" || method=="ACK") { if (nat_uac_test("19")) { setflag(6); force_rport(); fix_nated_contact(); }; force_rtp_proxy("l"); }; route(1); break; }; # Requests to others domains if (!is_from_local()) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (is_from_local()) { if (method=="CANCEL") { route(3); break; } else if (method=="INVITE") { route(3); break; } else if (method=="REGISTER") { route(2); break; }; }; } route[1] { ########################### # Default Message Handler # ########################### t_on_reply("1"); # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { if (method=="INVITE" && isflagset(6)) { unforce_rtp_proxy(); }; sl_reply_error(); }; } route[2] { ############################ # Register Message Handler # ############################ if (!search("^Contact:") && nat_uac_test("19")) { setflag(6); fix_nated_register(); force_rport(); }; if (!www_authorize("nxs.yi.org", "subscriber")) { www_challenge("nxs.yi.org", "0"); sl_send_reply("401", "Unauthorized"); break; }; if (!save("location")) { sl_reply_error(); break; }; } route[3] { ############################# # CANCEL and INVITE handler # ############################# if (nat_uac_test("19")) { setflag(6); }; if (isflagset(6)) { force_rport(); fix_nated_contact(); force_rtp_proxy(); }; if (!is_from_local()) { route(1); break; }; if (src_ip==192.168.0.50 && allow_trusted()) { route(4); route(1); } else if (src_ip==192.168.0.50 && !allow_trusted()) { if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); sl_send_reply("403", "Forbidden"); break; }; break; }; if (uri=~"sip:^1013@.*$" || uri=~"sip:^[0-9]{10}@.*$" || uri=~"sip:^06[0-9]{8}@.*$") { route(5); route(1); break; }; # native SIP destinations are handled using our USRLOC DB lookup("aliases"); if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; route(1); break; } route[4] { ########################## # Incoming PSTN Handler # ########################## if (uri=~"^[0-9]{10}@.*$") { strip(8); break; }; } route[5] { ########################## # Outgoing PSTN Handler # ########################## if (uri=~"sip:^1013@.*$") { if (!is_user_in("Request-URI", "local")) { sl_send_reply("403", "Forbidden"); break; }; } else if (uri=~"sip:^[0-9]{2}@.*$") { if (!is_user_in("Request-URI", "local")) { sl_send_reply("403", "Forbidden"); break; }; } else if (uri=~"sip:^06[0-9]{8}@.*$") { if (!is_user_in("Request-URI", "cell phone")) { sl_send_reply("403", "Forbidden"); break; }; rewritehostport("192.168.50:5040"); }; } onreply_route[1] { if (isflagset(6) && status=~"(180) | (183) | 2[0-9][0-9]") { force_rtp_proxy(); }; if (nat_uac_test("1")) { fix_nated_contact(); }; } _____________________________________________________________________________ Découvrez le nouveau Yahoo! Mail : 1 Go d'espace de stockage pour vos mails, photos et vidéos ! Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com