i have done this http://www.iptel.org/ser/doc/ser_radius/ser_radius.html. one thing i cant find any log under /usr/local/var/log/radius/radacct or /var/log/radius/radacct
i dont know how to invoke accounting
here is my ser.cfg
# # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script #
# ----------- global configuration parameters ------------------------
#debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E)
#memlog=3 #sip_warning=yes #server_signature=yes #mhomed=0
#uid="kamran"
#gid="kamran"
/* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */
check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 #children=4 fifo="/tmp/ser_fifo"
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/auth_radius.so" loadmodule "/usr/local/lib/ser/modules/acc.so"
# Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" #loadmodule "/usr/local/lib/ser/modules/auth_db.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
modparam("auth_radius","radius_config","/usr/local/etc/radiusclient/radiusclient.conf") #modparam("auth_radius","radius_log","/usr/local/var/log/radius/radacct") modparam("auth_radius","service_type",15) #modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #modparam("usrloc", "db_mode", 2)
# -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) #modparam("auth_radius", "calculate_ha1", yes)
# # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password") #modparam("auth_radius", "password_column", "password")
# -- rr params -- # add value to ;lr param to make some broken UAs happy #modparam("rr", "enable_full_lr", 1)
# ------------------------- request routing logic -------------------
# main routing logic
route {
# initial sanity checks -- messages with # max_forwards==0, or excessively long requests log(1,"inside route"); if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; };
# we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol log(1,"calling record_route"); record_route(); # loose-route processing if (loose_route()) { t_relay(); break; };
# if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) log(1,"checking register:uri="); #log(1,uri); #log(1,myself); if (uri==myself) {
log(1,"checking Register Message received"); if (method=="REGISTER") { # Uncomment this if you want to use digest authentication # if (!www_authorize("mydomain.com", "subscriber")) { # www_challenge("mydomain.com", "0"); # break; # };
log(1,"Register Message received"); if (!radius_www_authorize("")) { www_challenge("", "0"); break; }
save("location"); break; };
# native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP
# if requests URI is numerical and starts with # zero, forward statelessly to a static destination if (!t_relay()) { sl_reply_error(); };
}
--- Iqbal iqbal@gigo.co.uk wrote:
the acc module is in SER NOT radius, its under the modules directory. IN the acc directory, there is a Makefile, open it up, in there there are two lines one for mysql accouting and one for radius, they will not work both together, hence u uncomment the line u need and then recompile
Iqbal
On 3/26/2005, "Kamran Ahmad" p_kami@yahoo.com wrote:
hello Marian
i cant find /modules/acc/Makefile in my freeradius-1.0.2. one thing more what is the configuration requiment for SER. can
you
send me ser configuration.
Thanks Kamran
--- Marian Dumitru marian.dumitru@voice-sistem.ro wrote:
Hello Kamro,
First you have to enable RADIUS support in acc module - uncomment corresponding lines in modules/acc/Makefile and recompile. Then configure your radius client library and
server
for accounting.
Best regards, Marian
Kamran Ahmad wrote:
hello
Finally i am able to use authentication from
radius
(Thanks to all who helped me). Now i want to
use
accounting from radius. Can any one tell me how
to
do
this
regrads Kamran
Do you Yahoo!? Yahoo! Small Business - Try our new resources
site!
http://smallbusiness.yahoo.com/resources/
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
-- Voice System http://www.voice-system.ro
Do you Yahoo!? Make Yahoo! your home page http://www.yahoo.com/r/hs
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
__________________________________ Do you Yahoo!? Yahoo! Small Business - Try our new resources site! http://smallbusiness.yahoo.com/resources/