3 Jan
2012
3 Jan
'12
8:04 a.m.
Hi,
I had a good laugh when I read the reply, but going through the whole
thread again I found this:
" It displays the same message even when I replace ADDR_IPV4 and ADDR_IPV6
with IP addresses. "
So there _IS_ some problem here.
Nuno, can you please copy paste the exact command which you executing, plus
paste the logs,
--
Regards,
Sammy.
On Tue, Jan 3, 2012 at 2:22 PM, Daniel-Constantin Mierla
<miconda(a)gmail.com>wrote;wrote:
Hello,
the ADDR_IPV4 and ADDR_IPV6 have to be replaced with real IP addresses
that you have on the system runnin RTPProxy.
Cheers,
Daniel
On 1/3/12 8:56 AM, nunu abe wrote:
Dear Daniel,
Greetings and Happy New year to you all! I would like to thank you very
much for your detailed and well structured tutorials on Kamailio. I am
resending this email as I sent the earlier one before I was a member of the
mailing list and I thought it may have been sent to the spam folder. If not
then, I apologize for double posting.
I was trying to design a similar scenario like the one " Run your own
SIP VoIP service on both IPv4 and IPv6 " as explained on Asipto web-page(
http://kb.asipto.com/kamailio:kamailio-mixed-ipv4-ipv6). However I ran
into difficulties with rtpproxy. The proxy is not routing media packets
as it should. I followed the instruction regarding the kamailio.cfg file
and edited the necessary lines according to my settings. I think my problem
comes from setting up the rtpproxy.
1. I edited the /etc/default/rtpproxy file. i.e. I uncommented the line
- CONTROL_SOCK="unix:/var/run/rtpproxy/rtpproxy.sock"
2. I started the rtpproxy with this command: rtpproxy -F -l ADDR_IPV4 -6
/ADDR_IPV6 . However, after this command the system returns the message : rtpproxy:
setbindhost: No address associated with hostname
It displays the same message even when I replace ADDR_IPV4 and ADDR_IPV6
with IP addresses.
3. I have also tried using the udp socket:- CONTROL_SOCK=udp:
127.0.0.1:22222, of course I have replaced the unix socket by this udp
socket in the kamilio.cfg file.
So my question is, what did I do wrong with the settings that SIP
messages are traversing normal from IPv4 client to IPv6 client and vice
versa but media files(RTP packets) are not? The rtpproxy receives the media
files from one client but fails to forward them to the other client.
Thanks for your help.
Maedot
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- http://www.asipto.comhttp://linkedin.com/in/miconda --
http://twitter.com/miconda
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users