Do you see PUBLISH requests with Event: dialog?
Note: those will be sent by pua_dialoginfo module to Kamailio itslef, thus will be sent on the loopback interface. You should see them with "ngrep -d any port 5060"
klaus
Am 09.02.2011 14:16, schrieb Spinov Evgeniy:
Hello all.
I'm having problem with sending NOTIFY packet for event dialog.
The problem is, that all NOTIFY packets sent with this event is empty. ( Content-length: 0 ) and in fact, not passing actual status to the phone. In my case this is SPA962.
NOTIFY packets for event presence are sent fine and status is changing normally.
The same phone, works fine with Asterisk. Asterisk is sending NOTIFY with non-zero content and changing status for the subscriber as well.
I've turned on pua module to send PUBLISH requests at Kamailio, it's filling DB table with subscription, everything runs fine and NOTIFY packets are coming to subscribed phone, but they are empty.
I also have presence_dialoginfo module on and pua_dialoginfo module on. I've tried on Kamailio 3.0.3 and 3.1.1. Content always empty.
There is no sense of pasting here packet dumps, cause everything is like should be:
(UAC) SUBSCRIBE, event: presence ---> K K ---> 202 OK (SPA) SUBSCRIBE, event: dialog ---> K K ---> 202 OK PUBLISH, event: presence ---> K K ---> 200 OK NOTIFY, event: presence, Content-Length: XXX ---> UAC NOTIFY, event: dialog, Content-Length: 0 ---> SPA962
As result, softphone changes status and hardphone ( SPA962 ) - no. May be it's cause of PUBLISH event value?
Please advise.
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users